Beurer BC 40 Mode D'emploi page 23

If the battery replacement symbol
no longer perform any measurements and must replace all
batteries.
Battery disposal
• The empty, completely flat batteries must be disposed of
through specially designated collection boxes, recycling
points or electronics retailers. You are legally required to
dispose of the batteries.
• The codes below are printed on batteries
containing harmful substances:
Pb = Battery contains lead,
Cd = Battery contains cadmium,
Hg = Battery contains mercury
Setting the hour format, date and time
This menu allows you to set the following functions, one
after another.
Hour format
➔
It is essential to set the date and time. Otherwise, you will
not be able to save your measurements correctly with a
date and time and access them again later.
If you press and hold the memory button M you can set
the values more quickly.
is displayed, you can
Date Time
➔
To access the settings mode, either reinsert the batteries or
press and hold the START/STOP button
when the device is switched off.
Hour format
• Select the desired hour format using the
memory button M and confirm with the
START/STOP button
Date
The year flashes on the display.
• Select the desired year using the memory
button M and confirm with the START/
STOP button .
The month flashes on the display.
• Select the desired month using the memory
button M and confirm with the START/STOP
button .
The day flashes on the display.
• Select the desired day using the memory button M
and confirm with the START/STOP button
If the hour format is set as 12h, the day/month
display is reversed.
23
for 5 seconds
.
.