Introduction; Parts And Service; Nameplate - Nilfisk Hydro-Retriever 2052 Mode D'emploi

INTRODUCTION

This manual will help you get the most from your Nilfi sk-Advance Hydro-Retriever™ 2052 / CR 1300. Read it thoroughly before operating the machine.
Note: Bold numbers in parentheses indicate an item illustrated on pages 8-9.

PARTS AND SERVICE

Repairs, when required, should be performed by Nilfi sk-Advance service personnel using Nilfi sk-Advance original replacement parts and accessories.
Call Nilfi sk-Advance for repair parts or service. Please specify the Model and Serial Number when discussing your machine.
NAME PLATE
The Model and Serial Number of your machine are shown on the Nameplate on the machine. This information is needed when ordering repair parts for the machine.
Use the space below to note the Model and Serial Number of your machine for future reference.
MODEL ______________________________________________________
SERIAL NUMBER ______________________________________________
UNCRATING
When the machine is delivered, carefully inspect the shipping carton and the machine for damage. If damage is evident, save the shipping carton so that it can be
inspected by the carrier that delivered it. Contact the carrier immediately to fi le a freight damage claim.
1 After removing the crate, remove the wooden blocks next to the wheels.
2 Check the engine oil level, add oil if necessary.
3 Check the engine coolant level, add coolant if necessary.
4 Check the hydraulic oil level, add oil if necessary.
5 Read the instructions in the Preparing the Machine For Use section of this manual, then fi ll the fuel tank.
6 Place a ramp next to the front end of the pallet.
7 Read the instructions in the Operating Controls and Operating the Machine sections of this manual and start the engine. Slowly drive the machine forward from
the pallet to the fl oor. Keep your foot lightly on the brake pedal until the machine is off the pallet.
CAUTION!
Use extreme CAUTION when operating this machine. Be certain that you are thoroughly familiar with all operating instructions before
using this machine. If you have any questions, contact your supervisor or your local Nilfi sk-Advance Industrial Dealer.
If the machine malfunctions, do not try to correct the problem unless your supervisor directs you to do so. Have a qualifi ed company mechanic or an authorized Nilfi sk-
Advance Dealer service person make any necessary corrections to the equipment.
Use extreme care when working on this machine. Loose clothing, long hair, and jewelry can get caught in moving parts. Turn the Key Ignition Switch OFF and remove
the key before servicing the machine. Use good common sense, practice good safety habits and pay attention to the yellow decals on this machine.
* Note: Reference the separately supplied engine manufacture's maintenance and operator manual for more detailed engine specifi cation and service data.
FORM NO. 56041606 - Hydro-Retriever
ENGLISH / A-3
2052 / CR 1300 - A-3
™