Cleaning, Changing The Infrared Lamp And Storage - Beurer IL 50 Mode D'emploi

6

Cleaning, changing the infrared lamp and storage

Cleaning
Important
Before cleaning the unit, switch it off,
unplug it and allow it to cool down com-
pletely.
Changing the infrared lamp
Remember that a faulty lamp should only
be replaced with a lamp of the same type.
Replacement lamp
Type: Halogen lamp 220-240V/ 300W 118
mm long for R7S socket
Osram
Haloline 64705 – 230 V- R7S
4400 Im
Philips
Plusline Pro Small / 300 T3
Q /CL /P 230 V; 300 W; R7S
Original
Order no. 162.620
Procedure
1. Place the cool unit with the glass
ceramic plate down on a flat sur-
face.
2. Using a suitable crosshead screw-
driver, undo the six screws in the
back panel.
20
Important
• Ensure that no water enters the unit!
• Do not wash the unit in a dishwasher!
The unit can be cleaned with a damp cloth.
Do not use cleaning agents.
Warning
Danger of an electric shock!
• Before changing the lamp, make sure
the power cable is unplugged from the
socket.
• Risk of burning on hot surfaces!
• Allow the unit to cool completely before
any repairs.
• Lamps are not covered by the guaran-
tee.