Unit Description; Using The Unit For The First Time And Changing The Batteries - Beurer EM 38 Mode D'emploi

4. Unit description

Overview of the control unit
Item Item Designation
1 On/off/pause button
2 Intensity adjustment
increase
decrease
3 Program/locking key
4 Battery compartment
5 Display with LCD display

5. Using the unit for the first time and changing the batteries

Putting on the belt
Before each use, ensure that your skin is clean and free of creams or oils.
Only in this way the unit can work optimally.
• Lay out the belt before you with the electrodes facing you.
• Moisten the electrodes and your back with water. Ensure that the elec-
trode surfaces are moistened evenly to avoid localised voltage peaks
when they are applied to your skin.
• Fit the belt around your waist so that the vertical seams A are at the
same place on each side of your body. The Beurer logo B is then in the
middle of the spinal column.
See the diagram.
When positioned correctly, the electrodes C are slightly to the left and right of your spinal column.
• Then, close the Velcro fastener.
Item Item Designation
6 Battery status, appears when batteries are used up
7 Intensity, level 0 – 20
8 Pause symbol, flashes when activated
9 TIMER: Remaining time of the active programs in
minutes
10 Keylock active
11 Active program
15
A
C
A
B