Additional Information; Cleaning And Maintenance - Beurer BF 950 Mode D'emploi

If less energy is taken in than is used over a long period of time, the body primarily takes the difference from
the fat stores with resulting weight loss. However, if the amount of energy taken in exceeds the calculated
active metabolic rate (AMR) for a longer period, the body cannot burn off the excess energy. The excess is
stored in the body as fat, leading to weight gain.
Temporal context of the results
Note: Please note that only the long-term trend is important. Brief deviations in weight within a few days are
normally caused by loss of fluids.

9. ADDITIONAL INFORMATION

User assignment
It is possible to assign up to 8 scale users for a weight-only measurement (with shoes) and for a diagnosis
measurement (bare feet). User assignment is not possible with the tare function.
For a new measurement, the scale assigns the measurement to the user whose most recently saved measu-
rement falls within +/– 3kg of this.
Storing the assigned measurements on the scale and transferring them to the app.
If the app is not open, the newly assigned measurements are saved on the scale. A total of 30 measurements
per user can be saved on the scale. The saved measurements are transferred automatically to the app when
you open the app within the Bluetooth range.
Deleting scale data
• Delete all
Briefly apply pressure to the scale; the time and temperature are displayed. Hold down the U
button on the rear of the scale for approx. 6 seconds. "CLr" will appear on the display for several
Reset
seconds.
Note: All saved values and settings are deleted.
• Delete individual users
Briefly apply pressure to the scale twice until "0.0" appears. Press the "
When "0.0" and your initials are displayed, hold down the U
for approx. 3 seconds. "dEL" appears on the display.
Note: This user is deleted.
Changing the batteries
Your scale is equipped with a low battery indicator. If you operate the scale with flat batteries, "Lo" will appear
on the display and the scale will automatically switch off. In this case, the batteries must be replaced (4 x 1.5
V AAA). All saved measurements and users remain saved.
Connect the scale to the app again. The system time is updated.

10. CLEANING AND MAINTENANCE

The device should be cleaned from time to time. This should be done using a damp cloth and, if necessary,
a small amount of detergent.
IMPORTANT
• Never use harsh solvents or cleaning agents!
• Never submerge the device in water!
• Do not clean the device in the dishwasher.
The accuracy of the measurements and service life of the device depend on its careful handling:
• Do not place any objects on the scale when not in use.
• Protect the device from knocks, damp, dust, chemicals, marked temperature fluctuations and nearby
sources of heat (ovens, heaters).
• Do not press the buttons violently or with pointed objects.
• Do not expose the scale to high temperatures or strong electromagnetic fields.
nit/Delete/Reset
26
nit/Delete/
" buttons to select your user.
button on the rear of the scale