Additional Information; Care And Maintenance - Beurer BY90 Mode D'emploi

NOTE: Measurements saved on the baby scale before it is paired with your mobile device cannot be
transferred.
Subsequent synchronization with the app
If you have not synchronized the baby scale with the „beurer BabyCare" app during initial use, you can
also do this later.
1. Press the Power/Tare Button
2. „App" flashes in the LCD Display for 10 seconds. If the app is open, it will attempt to connect to the
scale for 10 seconds.
Alternatively:
Press the Bluetooth
can be connected for 120 seconds.
3. The baby scale is successfully connected to the app when the Bluetooth
LCD Display.

8. Additional information

Saving the measured values on the baby scale and transferring them to the app
A maximum of 10 measurements can be saved in the baby scale. The saved measurements are
transferred automatically to the app if you open the app within the Bluetooth
switched on on the scale. It is not possible to automatically transfer data when the baby scale is switched
off.
Deleting Measurements
To delete all measurements stored in the scale, press and hold the Bluetooth
Using the tape measure
Pull out the tape measure on the top of the baby scale to measure the baby's length and other features.
To retract, press the Button next to the tape measure on the bottom of the scale. Enter the length and
head circumference of your baby into the „beurer BabyCare" app.
Changing the batteries
Your scale is equipped with a low battery indicator. If you operate the scale with flat batteries, „ " will
appear on the display and the scale will automatically switch off. In this case, the batteries must be re-
placed (3 x 1.5 V AAA). All saved measurements remain saved.
NOTE:
• You have to re-synchronise the baby scale with the app (see „Initial use with the app" section) after
replacing the batteries.
• When replacing the batteries, use batteries of the same type, make and capacity.
• Do not use rechargeable batteries.

9. Care and Maintenance

• The baby scale should be cleaned from time to time.
• Clean the scale with a damp cloth and a mild detergent. Do not immerse the scale in water or rinse it
under running water.
• Store the scale in a cool, dry place when not in use; ensure no objects are placed on the scale during
storage. If storing the scale for an extended period, remove the batteries.
IMPORTANT
• Never use harsh solvents or cleaning products!
• Do not submerge the baby scale in water.
• Do not rinse the baby scale under running water.
to power the scale on.
button whilst the baby scale is in operation. If the app is open, the baby scale
®
7
symbol appears in the
®
range and Bluetooth
®
Button for five seconds.
®
is
®