Before First Use; To Use - Beurer BY90 Mode D'emploi

Masquer les pouces Voir aussi pour BY90:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

6. Before First Use

Remove the Battery Compartment Cover located underneath the scale and insert three „AAA" size
alkaline batteries (included) according to the polarity markings inside the compartment. Replace Battery
Compartment Cover. When „ " appears in the LCD Display, the batteries need to be replaced. Note
that when replacing batteries, you will need to pair the scale with your mobile device again.
After batteries are inserted properly, „
seconds to pair the scale with your mobile device via Bluetooth
your mobile device, note that „app" will flash for 10 seconds whenever you first power on the scale.
The indicator is no longer displayed once synchronisation with the app is successful.

7. To Use

You can transfer the measured weight values to your paired mobile device via Bluetooth
„beurer BabyCare" app. Keep your mobile device close to the scale to maintain an active Bluetooth
connection during initial use. Press the Power/Tare Button to activate the scale. To use the scale with
your mobile device, start with step 1; otherwise, press any button to cancel app use and skip to step 6.
1. Download the free „beurer BabyCare" app from the Apple App Store (iOS) or from Google Play
(Android™).
2. Activate Bluetooth
NOTE: Bluetooth
vice's Bluetooth
®
3. Start the „beurer BabyCare" app and follow the instructions.
4. Enter user data. Settings for baby's date of birth (Day, Month, and Year) must be entered into the
„beurer BabyCare" App.
5. The scale is successfully connected to the app when the Bluetooth
Display.
6. When „0.00 lb" appears in the LCD Display, the scale is ready for use.
7. Carefully place the baby onto the weighing surface, taking particular care with the baby's head.
8. If you do not want to place the baby directly on the weighing surface and prefer to use a towel or
blanket, place it on the scale first and then press the Tare Button
„Tare" appears in the LCD Display and the weight resets to zero. Now place the baby onto the scale.
9. This scale has both automatic and manual „HOLD" functions. The auto hold function displays the
baby's weight when it has stabilized enough to detect an exact value; it remains displayed for 120
seconds.
NOTE: I f the weight cannot be determined automatically after 8 seconds, the baby scale averages
the weight over 4 seconds (flashing display of the weight on the baby scale display).
10. If the baby is moving around too much, press the HOLD Button when the baby is as calm as he/she will
become. Within six seconds, the word „HOLD" stops flashing and the averaged weight is displayed.
11. To shut the auto hold function off completely, press and hold the HOLD Button for three seconds.
„HOLD" and „Off" will appear in the LCD Display. To reactivate the auto hold function, press and hold
the HOLD Button again; „HOLD" and „On" will appear in the LCD Display.
12. To transfer the measured weight to the app (if you are using the Bluetooth
and press the Bluetooth
transfer is complete.
13. If you decide not to transfer the measured weight to the app or are not using the Bluetooth
the scale will shut off after 120 seconds. To shut off the scale manually, press and hold the Power/
Tare Button
for three seconds.
in your mobile device's settings.
®
devices, such as this scale, may not be visible in the general settings of your de-
®
device list.
Button on the front panel of the scale. The scale will shut off when data
®
" will flash in the LCD Display. At this point, you have 120
6
. If you do not pair the scale with
®
symbol
appears in the LCD
®
to „zero out" the LCD Display;
function), open the app
®
using the
®
®
function,
®

Publicité

Table des Matières
loading

Table des Matières