Scope Of Delivery; Accessories - Wilo DrainLift XL Notice De Montage Et De Mise En Service

Masquer les pouces Voir aussi pour DrainLift XL:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43
5.2
Technical data
Dimensions (width/height/depth)
Diagonal dimension
Net weight
Pressure connection
Inlet ports
Ventilation
1)
*
Improper system and pipe installation, as well as impermissible operation, can increase the
acoustic emissions.
Faeces lifting unit for building DN 80
Lifting power
Noise level
Corrosion protection

5.3 Scope of delivery

5.4 Accessories

• Flange piece DN 80, DN 80/100 (1 pc. DN 80/100 already included in scope of delivery),
• Connection set for inlet DN 100 (keyhole saw Ø 124, inlet seal)
• Gate valve (DN 80) for discharge pipe
• Gate valve (DN 100, DN 150) for inlet pipe
• Diaphragm hand pump R 1½ (without hose)
• 3-way cock for switching over to the manual suctioning from the pump sump/tank
• Alarm switchgear
• Horn 230 V / 50 Hz
• Flash light 230 V / 50 Hz
• Signal lamp 230 V / 50 Hz
Installation and operating instructions Wilo-DrainLift XL
WILO SE Dortmund
Nortkirchenstr. 100, 44263 Dortmund, Germany
EN 12050-1
- See pump curve
- TRS
– coated, or corrosion-resistant materials, inox/composite
Please state all the information on the system name plate when ordering spare parts.
Sewage lifting unit, including:
1 Switchgear DrainControl PL2/0.3-12.0 A (3~ 400 V) with 1.5 m mains cable and
32 A CEE plug, pre-installed
1 Breakdown barrier in the housing with 1 m cable, pre-installed
1 Level sensor 0-1 mwc, 10 m cable
1 Inlet seal DN 150 (for pipe Ø 160 mm)
1 Keyhole saw Ø 175 for inlet DN 150
1 DN 150 hose section with clamps for DN 150 inlet connection
1 Hose section PVC Ø 50 mm with hose clips for connecting the suction line to the dia-
phragm hand pump or an inlet DN 50
1 Collar for ventilation connection, DN 70
1 Set of fixation material
1 Flange piece DN 80/100 with flat gasket, flexible hose section, hose clips, bolts and
nuts for connecting the discharge pipeline DN 100
1 Installation and operating instructions
Accessories must be ordered separately. For a detailed list and description, see the cata-
logue/price list.
The following accessories are available:
DN 100, DN 150 for connecting the slide valve on the intake or pressure side to the piping
DrainLift XL
2/10
2/15
[mm]
835/955/1120
[mm]
1300
[kg]
108
[DN]
80
[DN]
50, 100, 150
[DN]
70
CE
09
English
2/20
2/25
25

Publicité

Table des Matières
loading

Table des Matières