Radio Calls; Selective Radio Inhibit; Receive A Selective Call; Receive A Call Alert™ Page - Motorola Commercial Série Manuel De L'utilisateur

RADIO CALLS

SELECTIVE RADIO INHIBIT

Your radio is equipped with a security feature
that can temporarily render the unit inoperative
when an inhibit signal is sent from the base
station.
This feature is commonly used to disable
radios:
• In case of theft
• For system control reasons
When your radio has been rendered
inoperative by the base station,all controls will
be inoperative except for the On/Off button and
the display shows INHIBIT.

RECEIVE A SELECTIVE CALL

When you receive a selective call:
• The LED indicator flashes yellow, if pro-
grammed by your dealer/programmer.
• You hear two high-pitched tones.
1 To acknowledge the call, press and release the
PTT button.
2 Press and hold the PTT button to talk; release
to listen.
RECEIVE A CALL ALERT™ PAGE
When you receive a Call Alert page:
• The LED indicator flashes yellow, if pro-
grammed by your dealer/programmer.
• You hear four high-pitched tones.
To acknowledge the page, press and release
the PTT button; to cancel the page, press any
other key.
25
English