Appendix 3: Air Tubes And Baffle Installation - SBI Escape 2100 Mode D'emploi

Masquer les pouces Voir aussi pour Escape 2100:
Table des Matières

Publicité

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/26/2019 7:45:42 AM
1 - INSTALLATION MANUAL SERIES 3.5 ENGLISH

APPENDIx 3: AIR TUBES AND BAFFLE INSTALLATION

1.
Starting with the rear tube, lean and stove the right end of the secondary air tube into the rear
right channel hole. Then lift and stove the left end of the tube into the rear left channel.
2.
Align the notch in the left end of the tube with the key of the left air channel hole. Using a « Wise
grip » hold the tube and lock it in place by turning the tube as shown in detail A . Make sure the
notch reaches the end of the key way.
3.
Repeat steps 1 and 2 for the two tubes in the back then install the baffle before installing the
two front tubes.
4.
To remove the tubes use the above steps in reverse order.
Page 34
Stove Builder International Inc. | 44826 | Rev: May 31 2019 2:49PM | Uncontrolled Copy
A
DETAIL A
Installation and operation manual - 3.5 Series
(34 OF 37)
Page 41 of 425

Publicité

Chapitres

Table des Matières
loading

Table des Matières