Table des Matières
Publicité
Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/26/2019 7:45:42 AM
PRODUCT EVALUATION REPORT 103536746MTL-003
PRODUCT EVALUATION FOR STOVE BUILDER INTERNATIONAL
Report No.: 103536746-MTL003
Date: 02/11/19
1
Introduction
Intertek Testing Services NA Ltd./Inc. (Intertek) is conducting a product evaluation for Stove Builder International,
on Escape 2100, HT-3000, Gateway 3500, Osburn 3500, to evaluate if the differences with the previously certified
Solution 3.5 will increase particulate matter emission rate limit. The evaluation is being conducted to determine if
items listed in U.S. Environmental Protection Agency 40 CFR Part 60 Standards of Performance for New Residential
Wood Heaters; Final Rule, SECTION 60.533(k) will show equivalency with the previously tested Solution 3.5 Stove.
2
Product and Assembly Description
2.1. Product Description:
The model Solution 3.5 Wood Fuel Room Heater is constructed of sheet steel. The outer dimensions are
33 3/4-inches deep, 34 7/16-inches high, and 27 9/16-inches wide. The unit has a door located on the front with a
viewing glass.
Construction drawings are in appendix and named EB00053_CERTIF.
This PEV refers to a product described in Intertek Test Report 103536746-MTL002. Consult that document for
additional information and specific test conditions.
2.2. Product Traceability:
The test specimen identification is as provided by the client and Intertek accepts no responsibility for any
inaccuracies therein.
2.3. Product Certification:
Stove Builder International is an Intertek testing client and an Intertek Listing and Follow-up Service client. Stove
models Escape 2100, HT-3000, Gateway 3500 and Osburn 3500 are in the process of listing within Intertek.
Intertek currently does not have any Listings for Escape 2100, HT-3000, Gateway 3500 and Osburn 3500 contained
in Intertek's Directory of Listed Building Products.
Authorities Having Jurisdiction (AHJ) should be consulted in all cases as to the particular requirements covering the installation and use of
Intertek certified products, equipment, systems, devices and materials. The AHJ should be consulted before construction. Fire resistance
assemblies and products are developed by the design submitter and have been investigated by Intertek for compliance with specific
requirements. The published information (product and design listings) cannot always address every construction nuance encountered in the
field. When field issues arise, it is recommended the first contact for assistance be the technical service staff provided by the product
manufacturer noted for the design. Users of fire resistance assemblies are advised to consult the test standard referenced for each Intertek
certified product. The test standard includes specifics concerning alternate materials and alternate methods of construction. Only products
which bear Intertek's Mark are considered as certified. The appearance of a company's name or product in Intertek Directory of Listed Building
Products does not in itself assure that products so identified have been manufactured under Intertek's Follow-Up Service. Only those products
bearing the Intertek Mark should be considered to be Listed and covered under Intertek's Follow-Up Service. Always verify the Mark on the
product before using it.
Version: 12/15/17
Stove Builder International Inc. | 44826 | Rev: May 31 2019 2:49PM | Uncontrolled Copy
Page 3 of 7
(3 OF 50)
1829, 32nd AVenue
Lachine, Quebec H8T 3J1
Telephone: (514)631-3100
Facsimile: (514)631-1133
www.intertek.com/building
SFT-BC-OP-19h
Page 279 of 425
Publicité
Chapitres
Table des Matières
