SBI Escape 2100 Mode D'emploi page 253

Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/26/2019 7:45:42 AM
COMPONENTS
ETL Mark Minimum Labeling Requirements (new Intertek Mark)
MINIMUM MARKING REQUIREMENTS FOR PRODUCTS BEARING THE ETL MARK
The ETL Listing Certification Mark Label consists of the following four items:
1. The ETL Certification Mark with "US" and/or "C" as identifiers. The letter "C" adjacent and to the lower left
side of the ETL Certification Mark indicates that the product complies with a Canadian standard. The
letters "US" adjacent and to the lower right side of the ETL Certification Mark indicates that the product
complies with a US standard. The required minimum size of the identifiers is 2 mm.
2. The word, "Listed" or "Classified" or "Recognized Component" (whichever is appropriate). The word,
"Listed" is to be incorporated into the ETL Certification Mark. If upon reduction, the word "listed" is not
legible as part of the trademark, it shall also appear separately.
3. The Control Number issued by Intertek Testing Services. This five to eleven digit number is unique to the
manufacturing site for each applicant.
4. A standard description, which refers to the national standard used for certification shall be used.
Example:
For US standards, the words, "Certified to" shall appear with the standard number along with the word,
"Standard" or "Std." Example: "Certified to ANSI/UL Std. XX."
For Canadian standards, the words "Certified to CAN/CGA Standard CXX No. XX", shall be used, or
abbreviated, "Cert. to CAN/CSA Std CXX No. XX".
If the manufacturer wishes, they may use the standard title, example "Telephone Equipment."
5. The following phrase: "Refer to Intertek's Directory of Building Products for detailed information."
Nothing selected
Nothing selected
Listing Report General Information
LISTING REPORT GENERAL INFORMATION
The Applicant has agreed to produce, test and label Intertek Listed products in accordance with the
requirements of the Listing Report.
authorization prior to using alternate parts, components or materials.
INSTRUCTIONS FOR USE
A copy of the Listing Report is provided to the Applicant and is used by the Intertek Field
Representative for Follow-up Service Inspections; and one copy is retained in files at the Intertek
Regional Certification Center.
The Listing Report will provide the Applicant with a guide for the operation of the certification program.
Stove Builder International Inc. | 44826 | Rev: May 31 2019 2:49PM | Uncontrolled Copy
The Applicant has also agreed to notify Intertek and request
Page 348 of 425