Table des Matières
Publicité
Report prepared for Guillaume Thibodeau-Fortin (Stove Builder International Inc.) on
6/26/2019 7:45:42 AM
1 - INSTALLATION MANUAL SERIES 3.5 ENGLISH
6.3.1
Adjustment
In order for the insert to burn at its best efficiency, the door must provide a perfect seal with the
firebox. Therefore, the gasket should be inspected periodically to check for a good seal. The
gasket seal may be improved with a simple latch mechanism adjustment:
1.
Remove the split pin by pulvvling and turning it using pliers.
2.
Turn the handle counter clock wise one turn to increase pressure.
3.
Reinstall the split pin with a small hammer.
Figure 8: Removing the split pin
1.
Unscrew the nut (A).
Remove the door latch (B) and the key path
2.
pin (C).
3.
Remove or add one washer (D) as needed.
Keep
the
adjustment.
Reinstall the key path pin (C) in the keyway
4.
and slide the latch (B) along it.
5.
Reinstall the nut.
Installation and operation manual - 3.5 Series
Stove Builder International Inc. | 44826 | Rev: May 31 2019 2:49PM | Uncontrolled Copy
removed
washer
for
future
Figure 9: Installing the split pin
D
C
B
A
Figure 10: Joint d'étanchéité
(21 OF 37)
Page 21
Page 28 of 425
Publicité
Chapitres
Table des Matières
