Symbols In This Manual; Mowing Tips - Ryobi RLM18X33H40 Traduction Des Instructions Originales

WARNING
Indicates a potentially hazardous situation,
which, if not avoided, could result in death or
serious injury.
CAUTION
Indicates a potentially hazardous situation,
which, if not avoided, may result in minor or
moderate injury.
CAUTION
(Without safety alert symbol) Indicates a
situation that may result in property damage.

SYMBOLS IN THIS MANUAL

Parts or accessories sold
separately
Waste electrical products
should not be disposed of
with household waste. Please
recycle where facilities exist.
Keep hands away from blades
Note
Warning
Stop the product.

MOWING TIPS

The run time of the battery depends on the
condition, length, and density of the grass.
Adjust the cutting height of the lawn mower
to suit the current condition of the lawn to be
mowed.
Suggested height
adjustment
Grass
conditions
First pass
Very thin / Dry 3
Thin / Dry 4
Medium /
5
Dense
6 | English
Coverage
(maximum)
Succeeding 4 Ah 5 Ah
passes battery battery
2 200 m 250 m
2
3 → 2 150 m 200 m
2
4 → 3 100 m 150 m
2
■ For best performance, always cut off one-
third or less of the total height of the grass.
■ When cutting long grass, reduce walking
speed to allow for more effective cutting
and a proper discharge of the clippings.
■ Do not cut wet grass; it will stick to the
underside of the deck and prevent proper
collection or discharge of grass clippings.
■ New or thick grass may require a higher
cutting height.
■ A higher cutting height will extend the run
time of the battery.
■ If you wish to collect the grass cuttings for
disposal, remove the mulching plug and
fit the grass box making sure the top flap
is properly closed. Empty the grass box
regularly; otherwise, the discharge chute
will become blocked with grass cuttings.
■ If you are making a light cut and wish for
the grass cuttings to remain on the lawn,
fit the mulching plug and close the top flap
to cover the discharge opening. It is not
necessary to fit the grass box in this case.
■ The mower is designed to operate and cut
most effectively when moving forwards.
2
2
2