Change Code; Submenu Set Contrast; Submenu Mute Claves; Submenu Language - Bio Bronpi Elsa Instructions D'installation, D'utilisation Et D'entretien

- Enter into the "Learning menu" in the receiver of the stove. In order to do this, press simultaneously during 3 seconds keys P3 and P4.
Later, press key P2 until the display D1 shows the word "LEAr". Then, press the submenu with key P3. Press again key P3 so that the
display D1 shows "----" flashing (see drawing D74).
- After this, press key SET of the remote control so that the synchronisation is made with the code chosen. If the synchronisation is
correct, the display will show the text "Learning successful". On the contrary, it will show the text "Transferring failed" and you should
repeat the previous steps (see drawing D76).
- - - -
ESC
D74
Key tone
Enabled
Disabled
D77
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
GS W
10.4.6.6.

SUBMENU SET CONTRAST

This menu allows to modify the contrast of the screen of the remote control. Select with the keys

10.4.6.7. SUBMENU MUTE CLAVES

This menu allows to activate or deactive the sound when you press a key of the remote control. By default,
this option is activated and if you want, it is possible to deactivate it by pressing the keys
D77).
10.4.6.8.

SUBMENU LANGUAGE

It allows to select the language of the remote control. You can access this menu by pressing the key SET and
choose the language desired among those available: Spanish, Portuguese, French, German, English
and Italia and confirm with the key SET.

10.4.7. SYSTEM MENU

This menu allows to access the technical menu. It is protected with a password and it can only be accessed
by the Technical Assistance Service. If someone not authorised by Bronpi Calefacción access this menu, this
means the loss of the warranty.

Change Code

998
999
1000
1001
1002
D75
43
Learning
successful
D76
(see drawing
.
ELSA