Stove In Alarm State; General Information Of The Remote Control; Functions Of The Keys Of The Remote Control - Bio Bronpi Elsa Instructions D'installation, D'utilisation Et D'entretien

9.4.10.

STOVE IN ALARM STATE

When the stove has an alarm state, the display will show the following messages (see drawing D45 y D46).
ESC

10. GENERAL INFORMATION OF THE REMOTE CONTROL

10.1. GENERAL INFORMATION OF THE REMOTE CONTROL
Together with the stove, you will find a remote control by radiofrequency through which it is possible to control the
stove from a distance (see drawing D47).
The system works in the radiofrequency band of 433,92 Mhz ISM. The distance in the transmission and the
reception may be reduced in the case of an environment interfered by other wireless devices such as video
transmitters, toys or other devices that may affect the efficiency of the system. In order to guarantee the proper
operation, it is recommended to switch off some of these devices to avoid the pollution of the electromagnetic
waves. If there are more remote controls nearby, it is necessary to link each remote control with one stove (see
section 10.4.6.5).
10.2.

FUNCTIONS OF THE KEYS OF THE REMOTE CONTROL

The functions of the keys are explained below:
KEY FUNCTION
On / Off
Unblock
Escape
Set
Modify thermostat
Move in menu and submenu
Sleep mode
Standby mode
By pressing the key the display lights up and the main screen appears (see drawing D48):
INSTALLATION, OPERATING AND SERVICING INSTRUCTIONS
A L E
3 2 2
GS W
DESCRIPTION OF THE OPERATION
Ignites and switches off the stove by pressing the key during 3
seconds
Unblocks the stove by pressing the key during 3 seconds
Exit/back.
Enter the Menu, Submenu and save data.
Modify radio-thermostat
Move in submenu and menu
By pressing the key of the main screen, the remote control will
continue working but the screen will turn off. in order to turn on the
screen again, press again the key.
By pressing the key during 3 seconds in the main screen, it is
possible to turn off the remote control completely. This reduces the
battery consumption. This option can be used if the remote control is
not going to be used for a long time. If the function is activated, the
system will use the ambient probe connected to the stove. In order
to activate the remote control, press the key
E R 1 2
ESC
3 2 2
D45
36
GS W
D46
D47
twice.
ELSA