EdilKamin INPELLET 54 Installation, Usage Et Maintenance page 26

INSTALLATION
SYSTEM FOR ADJUSTING THE EXTERNAL DOOR IN RELATION TO THE INTERNAL FRAME
1) Adjustment to be performed when the external door is not "vertically" aligned with the internal frame
- loosen the 2 screws (V) on the internal frame corresponding to the slots
- if the external door is lower than the frame, push the internal frame to the left and tighten the screws
- if the external door is higher than the frame, pull the internal frame to the right and tighten the screws
V V
2) Adjustment to be performed when the external door is not "horizontally" aligned with the internal frame (Fig. 1)
- Loosen the 4 screws (S) equipped with M5 nuts on the internal frame and adjust the external door's alignment
with the frame itself. When properly aligned, tighten the M5 nuts.
S
fig. 1
S
26