Water Hardness - FAR LV12C47MI18W Manuel D'utilisation

ENGLISH
Adjusting Salt Consumption
The dishwasher is designed to allow for
adjustment in the amount of salt consumed
based on the hardness of the water used. This is
intended to optimise and customise the level of
salt consumption.
Please follow the steps below for adjustment in
salt consumption.
1. Switch on the appliance;
2. Press the Start/Pause button for more than
5 seconds to start the water softener set
model within 60 seconds after the appliance
was switched on;
3. Press the Start/Pause button to select
the proper set according to your local
environment; the sets will change in the
following sequence: H1
H4 H5 H6.
4. Press the On/Off button or no operation for
5 seconds to end the set up model.

WATER HARDNESS

°dH °fH °Clark mmol/l
GB-14
H2 H3
Selector Salt
Position consump-
tion
(gram/
cycle)
0~5 0~9 0~6 0~0.94 H1-Rapid
6-11 10-20 7-14 1.0-2.0 H2-90
12-17 21-30 15-21 2.1-3.0 H3-90
18-22 31-40 22-28 3.1-4.0 H4-Glass
23-34 41-60 29-42 4.1-6.0 H5-Glass
35-55 61-98 43-69 6.1-9.8 H6-Glass
Note:
°DH: German degree
°fH: French degree
°Clark: British degree
1°dH =1.25° Clarke=1.78° fH=0.178mmol/l
The manufactory setting: H (EN 50242)
ENGLISH
0
light bright
9
Min light
bright
12
Min and
Rapid light
bright
20
Light
bright
30
light bright
and Rapid
Light
bright
60
light bright
and 90
Min light
bright
3
GB-15