FAR LV12C47MI18W Manuel D'utilisation page 66

ENGLISH
Problem
Unsatis- The dishes
factory are not clean
washing
result
Cloudiness
on glassware
Black or gray
marks on
dishes
Detergent
left in dis-
penser cups
GB-56
Possible What to Do
Causes
The filter Clean and/or fit the
combina- filter combination cor-
tion in the rectly. Clean the spray
base of wash arm jets. See "Clea-
cabinet is not ning the Spray Arms".
clean or is
not correctly
fitted. This
may cause the
spray arm jets
to get bloc-
ked.
Combination Use less detergent if
of soft water you have soft water
and too much and select a shortest
detergent. cycle to wash the
glassware and to get
them clean.
Aluminum Use a mild abrasive
utensils cleaner to eliminate
have rubbed those marks.
against
dishes.
Dishes block Re-loading the dishes
detergent properly.
cups.
Problem Possible
Causes
Unsatisfac- The dishes Improper
tory drying are not loading
result drying
Too little
rinse-aid
Dishes are
removed too
soon
ENGLISH
What to Do
Load the dishwasher
as suggested in the
directions.
Increase the amount
of rinse-aid/refill the
rinse-aid dispenser.
Do not empty your
dishwasher imme-
diately after washing.
Open the door slightly
so that the steam can
escape. Begin un-
loading the dishwasher
only once t he dishes
are barely warm to
the touch. Empty the
low basket first. This
prevents water form
dropping off dishes in
the upper basket.
GB-57