Ingersoll Rand IRN 7.5 HP Manuel D'utilisation Et D'entretien page 12

10
SAFETY
Check with a qualified electrician or service technician if the
grounding instructions are not completely understood, or if in doubt as
to whether the product is properly grounded.
Keep all parts of the body and any hand−held tools or other
conductive objects, away from exposed live parts of the compressor
electrical system. Maintain dry footing, stand on insulating surfaces
and do not contact any other portion of the compressor when making
adjustments or repairs to exposed live parts of the compressor
electrical system.
WARNING
Any electrical connections or adjustments should only be
made by a suitably qualified electrician
Close and lock all access doors when the compressor is left
unattended.
Do not use extinguishers intended for Class A or Class B fires on
electrical fires. Use only extinguishers suitable for class BC or class
ABC fires.
Attempt repairs only in clean, dry, well lighted and ventilated areas.
Connect the compressor only to electrical systems that are
compatible with its electrical characteristics and that are within it's
rated capacity.
IRN 7.5 − 15 HP (5.5 − 11 kW)
Condensate disposal
As waste water regulations vary by country and region it is the
responsibility of the user to establish the limitations and regulations in
their particular area. Ingersoll Rand and its associated distributors are
happy to advise and assist in these matters.
For further information, consult Material Data Sheets
80440043 MSDS, Ultra Coolant English
80440068 MSDS, Ultra Coolant Spanish
80440050 MSDS, Ultra Coolant Portuguese
80442254 MSDS, Xtend Food Grade Coolant English.
The above information contains data supplied in support of United
Kingdom Control of Substances Hazardous to Health (C.O.S.H.H.)
regulations.
http://air.ingersollrand.com