Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
5. ASSEMBLING THE DOOR LATCH
Parts Required:
1
x
Door Latch Assembly (#5)
Installation:
•
Disassemble the hardware pieces from the door latch assembly.
•
Insert the latch handle (5-1), with the handle pointed down, through
the latch handle bezel (5-2) and into the front of the door. Line up the
anchor points of the latch handle bezel (5-2) with the anchor holes on
the front of door. Hold handle in place with one hand.
•
Next, on the interior side of the door, carefully and slowly place the
waved spring washer (5-3), then the latch bracket (5-4), as shown in
illustration. Secure all assembly with nut (5-5), using wrench.
IMPORTANT: Ensure handle moves smoothly. If too tight, loosen nut.
6. INSTALLING THE CABINET DAMPER KNOB
Parts Required:
1
x
Cabinet Damper Knob (#7)
Installation:
•
Remove the cabinet damper knob from the owners manual bag.
•
Next, twist the cabinet damper knob into the bottom hole of the
cabinet damper. The cabinet damper knob is positioned on the outside
of the Smoke Cabinet to allow easy adjustment to the airflow.
NOTE: Keep the cabinet damper closed when not in use.
7. INSTALLING THE COOKING COMPONENTS
Parts Required:
Cooking Grid Brackets (#8)
5
x
Cooking Grids (#10)
5
x
Installation:
•
Insert the five cooking grids into the support brackets along the
interior walls of the cabinet. To change the height between cooking
grids, adjust to personal preference.
NOTE: To maintain the grilling performance of your cooking grids,
regular care and maintenance is required.
8. PLACING THE GREASE TRAY
Parts Required:
1
x
Grease Tray (#6)
Installation:
•
Slide the grease tray into the grease tray brackets on the front
underside of the Smoke Cabinet. Ensure it slides along the rails, and
completely to the back.
IMPORTANT: Remove grease tray prior to moving unit to avoid spills.
•
The unit is now completely assembled.
5
5-2
5-5
5-3
5-4
6
7
8
5-1
DOWN
7
Publicité
Chapitres
Table des Matières
