Attaching The Caster Wheels; Assembling The Cart; Completing The Cart; Lifting The Ceramic Body Onto The Cart - Louisiana Grills 61180 Instructions

ATTACHING THE CASTER WHEELS

1
Attach the four pre-threaded caster wheels (2 & 3) to each of the four
brackets (1) by hand-tightening them into the hole.
2+3
1

ASSEMBLING THE CART

2
To assemble the cart, insert the two crosspieces (4) into two of the
four brackets (1) from both the top and bottom.
4
1

COMPLETING THE CART

3
Continue to insert the crosspieces (4) into the other two brackets (1).
Secure the brackets (1) to the crosspieces (4) by using the 16x screws
(A). Please note the position shown in the diagram.
8

LIFTING THE CERAMIC BODY ONTO THE CART

4
Make sure the cart is secure, and all of the bolts are tight before
placing the ceramic body (8) into it. Press down on the caster levers
(2) to lock the castor wheels to ensure the ceramic charcoal barbecue
cannot move.
To place the ceramic body (8) on the cart, first remove all of the items
that are inside of the grill to make lifting easier. Place one of your
hands in the bottom vent of the ceramic body and the other under
the grill.
CAUTION: Use a minimum of two people when lifting the ceramic
body onto the cart. Lifting by the hinge or the side tables could result
in injury and damage to the product.
Place the ceramic charcoal barbecue on the cart with the bottom
vent facing to the front of the cart allowing the vent to open and
close without any interruption.
8