Ec Declaration Of Conformity; Serial Numbers - SDMO DX 6000 TE XL C Manuel D'utilisation Et D'entretien

12. EC Declaration of conformity

Name and address of manufacturer: SDMO Industries, 12 bis rue de la Villeneuve, CS 92848, 29228 BREST CEDEX 2, FRANCE
Description of the equipment
Make
Type
Name and address of the person authorised to create and keep the technical file
G. Le Gall, SDMO, 12 bis rue de la Villeneuve, CS 92848, 29228 BREST CEDEX 2, FRANCE
G. Le Gall, the manufacturer's authorised representative, hereby declares that the equipment, if installed inside soundproofed
premises(*), complies with the following EU Directives:
2006/42/EC / Machinery Directive.
2006/95/EC / Low Voltage Directive.
2004/108/EC / Directive on Electromagnetic Compatibility.
(*) In this instance, Directive 2000/14/EC dated 08/05/2000 relating to noise
emission in the environment by equipment for use outdoors is not applicable. This
equipment must be installed in compliance with safety regulations by an approved
professional (consult us).

13. Serial numbers

Serial numbers shall be requested for technical assistance or when ordering spare parts.
Please indicate the generating set and engine numbers below.
GS serial number:
(E.g. "No.: 45/2007 – 39645109 – 001")
(indicated on the identification plate of the generating set affixed inside one of the two bands or to the frame.)
Engine brand: ...............................................
Engine serial number:
(E.g. Kohler "SERIAL NO. 4001200908")
Generating set
SDMO
DX 6000 TE XL C, DX6000TEXL-C
DX6000TEXL-R05A, DX6000TEXL-R05ATT
......../.............. - ........................ - .........
...............................................
08/2010 - G. Le Gall