Technical Specifications; Operating Conditions; Ec Declaration Of Conformity - SDMO ProSystem 4200 Manuel D'utilisation Et D'entretien

7. Technical specifications

7.1. Operating conditions

The stated outputs of the generating sets are obtained under the reference conditions outlined in ISO 8528-1(2005):

Total barometric pressure: 100 kPa - Ambient air temperature: 25°C (298 K) - Relative humidity: 30%.
Generating set performance is reduced by approximately 4% for every additional 10° C and/or approximately 1% for every additional
100m in altitude. Generating sets can only operate while stationary.
7.2. Capacity of the generating set (overload)
Before connecting and operating the generating set, calculate the electrical power required by the devices to be used (in watts)*. When
running several devices simultaneously, never exceed the rated load of the generating set (in amps and/or watts) when it is operating
continuously.
*This load is usually indicated in the technical specifications or on the device manufacturer's plate. Some devices require a higher load
when starting. This minimum required power must not exceed the generating set's maximum power.
7.3. Specifications
Model
Maximum output / Rated output
Acoustic pressure at 1 m and measurement uncertainty
Engine type
Recommended fuel
Fuel tank capacity
Recommended oil
Oil sump capacity
Oil failure cut-out
Circuit breaker
Direct current
Alternating current
Socket type
Spark plug type
Battery
Dimensions l x w x h
Weight (without fuel)
● : standard ○ : option

7.4. EC Declaration of conformity

Nom et adresse du fabricant :
SDMO Industries - 12 bis rue de la Villeneuve - CS 92848 -
29228 BREST Cedex 2 – France.
Description du matériel :
Groupe électrogène
L. Courtès, représentant habilité du fabricant, déclare que l'équipement est en conformité avec les Directives européennes suivantes :
2006/42/CE Directive machines ; 2006/95/CE Directive basse tension ; 2004/108/CE Directive compatibilité électromagnétique ;
2000/14/CE Directive relative aux émissions sonores dans l'environnement des matériels destinés à être utilisés à l'extérieur.
Organisme notifié :
CETIM - BP 67- F60304 -
SENLIS
7.5. Serial number
Serial numbers shall be requested for technical assistance or when ordering spare parts.
Please indicate the generating set and engine numbers below.
Generating set serial number:
(E.g. "No.: 45/2007 – 39645109 – 001")
(indicated on the identification plate of the generating set affixed inside one of the two bands or to the frame.)
...............................................
Engine brand:
...............................................
Engine serial number:
(E.g. Kohler "SERIAL NO. 4001200908")
X: not possible
Marque :
PROSYSTEM
Pour la directive 2000/14/CE :
Procédure de mise Niveau de puissance
en conformité : acoustique mesuré :
Annexe VI.
......../.............. - ........................ - .........
83 dB(A)
Nom et adresse de la personne autorisée à constituer et détenir
le dossier technique
L. Courtès - SDMO Industries - 12 bis rue de la Villeneuve -
CS 92848 - 29228 BREST Cedex 2 – France.
Type :
4200
Niveau de puissance
acoustique garanti (LwA) :
96.46 dB(A)
Brest, le 01/01/2014
L. Courtès, Directeur Adjoint Études et Projets.
PROSYSTEM 4200
4200 W / 3200 W
0.56 dB(A)
Kohler CH 395
Essence sans plomb
7,3 L
SAE 10W30
1,1 L
●
●
X
230V-13,9A
2 x 2P+T 230V 10/16A
CHAMPION : RC12YC
X
75,5 x 60 x 60 cm
72 kg
Numéros de série :
01-2014-00000000-000
> 52-2019-99999999-999
Puissance assignée :
97 dB(A) 3200 W