Functional Description; Intended Use - Bosch PCM 10 Notice Originale

OBJ_BUCH-573-001.book Page 35 Thursday, November 29, 2007 9:23 AM
Symbol

Functional Description

Read all safety warnings and all in-
structions. Failure to follow the
warnings and instructions may re-
sult in electric shock, fire and/or se-
rious injury.
Bosch Power Tools
Meaning
¢ Wear safety goggles.
¢ Wear a dust respirator.
¢ Wear hearing protection. Exposure to noise can cause hearing
loss.
¢ Danger area! Keep hands, fingers or arms away from this area.
Observe the dimensions of the saw blade. The hole diameter must
match the tool spindle without play. Do not use reducers or adapt-
ers.
Delivery Scope

Intended Use

The power tool is intended as a stationary ma-
chine for making straight lengthways and cross-
ways cuts in wood. Horizontal mitre angles of
– 45° to +45° as well as vertical bevel angles of
0° to 45° are possible.
The machine is designed with sufficient capacity
for sawing hard and softwood as well as press
and particle board.
English | 35
1 609 929 J60 | (29/11/07)