Functional Description - Bosch GSA 36 V-LI Professional Instructions D'emploi

All manuals and user guides at all-guides.com
OBJ_BUCH-303-002.book Page 16 Wednesday, May 23, 2007 10:05 AM
Do not open the battery. Danger of short-
circuiting.
Protect the battery against heat, e. g.,
also against continuous sun irradia-
tion and fire. There is danger of explosion.
In case of damage and improper use of the
battery, vapours may be emitted. Provide for
fresh air and seek medical help in case of
complaints. The vapours can irritate the respira-
tory system.
When the battery is defective, liquid can
escape and come into contact with adjacent
components. Check any parts concerned.
Clean such parts or replace them, if required.

Functional Description

Read all safety warnings and all
instructions. Failure to follow the
warnings and instructions may result in
electric shock, fire and/or serious injury.
While reading the operating instructions, unfold the
graphics page for the machine and leave it open.
Intended Use
The machine is intended for sawing wood, plastic,
metal and building materials while resting firmly on the
workpiece. It is suitable for straight and curved cuts.
When using the appropriate bimetal saw blades, it is
possible to cut flush to the workpiece surface. The
saw blade recommendations must be observed.
Product Features
The numbering of the product features refers to the
illustration of the machine on the graphics page.
1 Saw blade*
2 Adjustable footplate
3 Saw blade holder
4 Locking sleeve for saw blade
5 Stroke rod
6 Utility hook
7 Stroke speed selector switch
8 Soft grip
9 On/Off switch
10 Battery unlocking button
11 Battery*
12 Temperature control indicator
13 Battery charge-control indicator
14 Button for charge-control indicator
*The accessories illustrated or described are not
included as standard delivery.
16 | English
Technical Data
Sabre saw
Article number
Rated voltage V=
Stroke rate at no load n
0
– 1st gear spm
– 2nd gear spm
Tool holder
Stroke rate control
Stroke mm
Cutting capacity, max.
– in wood mm
– in non-alloy steel mm
– Pipe diameter mm
Weight according to
EPTA-Procedure 01/2003 kg
Please observe the article number on the type plate of your
machine. The trade names of the individual machines may vary.
Noise/Vibration Information
Measured values determined
EN 60745.
Typically the A-weighted noise levels of the product
are: Sound pressure level 86 dB(A); Sound power
level 97 dB(A). Uncertainty K =1,5 dB.
Wear hearing protection!
Vibration total values (triax vector sum) determined
according to EN 60745:
Cutting wood: Vibration
2
a =29,0 m/s , Uncertainty K=1,5 m/s
h
The vibration emission level given in
WARNING
this information sheet has been
measured in accordance with a standardised test
given in EN 60745 and may be used to compare one
tool with another.
The vibration emission level will vary because of the
ways in which a power tool can be used and may
increase above the level given in this information
sheet. This could lead to a significant underestimate
of exposure when the tool is used regularly in such a
way.
Note: To be accurate, an estimation of the level of
exposure to vibration experienced during a given
period of work should also take into account the times
when the tool is switched off and when it is running
but not actually doing the job. This may significantly
reduce the exposure level over the total working
period.
GSA 36 V-LI
Professional
3 601 F45 R..
36
0–2 400
0–3 000
SDS
28
250
20
130
4.2
according to
emission value
2
.
2 609 932 554 • 23.5.07