Arktic 226568 Mode D'emploi page 6

Grounding installation
This appliance is classified as protection class I
appliance and must be connected to a protective
ground. Grounding reduces the risk of electric
shock by providing an escape wire for the electric
Main parts of the appliance
EN
Remark: The content of this manual applies for all listed items unless specified otherwise. The outlook and
appearance may vary from the shown illustrations.
Indicator light status description
Symbol indicator
C
def
Set the temperature
• Plug into a suitable electrical outlet.
• When set indicator light is OFF, press and hold
1a. button for 3 to 4 seconds until
the display. Then, release the 1a. button & press
1a. button again.
6
current. This appliance is equipped with a cord
having a grounding wire with a grounding plug. The
plug must be plugged into an outlet that is properly
installed and grounded.
1. Digital control panel
a. Set button for setting temperature
b. Light ON/ OFF/ Increase setting of tempera-
c. Decrease setting of temperature
d. Confirm setting / manual defrost
e. Temperature digits
2. Air vents
3. Shelf
4. Glass door handle
5. Light
6. Door key lock
Status
ON
OFF
ON
OFF
FLASH
ON
ON
• Next, press 1b. button to increase the setting
temperature by 1°C or press 1c. button to de-
is shown on crease by 1°C.
• After that, press 1d. button to confirm the setting
and exit.
ture
Description
Under setting mode
Operating under the setting condition
Compressor works and cooling active
Compressor not works and cooling inactive
Preparing cooling process
Under refrigeration process
Under defrost process