Ec Conformity - Vortice VHD Notice D'emploi Et D'entretien

ENGLISH
SENTATIVE and also the return form is filled accordingly. The transport agency will be determined and agreed by
Vortice. No return will be accepted without the form filled.

EC Conformity

All fans manufactured and supplied by Vortice comply with the EC regulation 2014/35/UE (Low Voltage), 2006/42/EC
(Machinery), 2014/30/UE (Electromagnetic compatibility), 2009/125/EC* (Ecodesign). It is also extended for each par-
ticular range in compliance with the required specific standards.
UNE-EN ISO 12100-1
UNE-EN ISO 12100-2
EN ISO 13857
ISO 13852
UNE 100250 (ISO 12499)
ISO 3744
ISO 1940-1
ISO 10816-1
All the applications in general in which any electronic speed regulator is required with the fan, must be previously
consulted and approved by Vortice and comply with the directives 2014/35/UE (Low Voltage), 2006/42/EC (Machi-
nery), 2014/30/UE (Electromagnetic compatibility), 2009/125/EC* (Ecodesign). To increase security when maintai-
ning the fan, Vortice suggests the installation of maintenance switches of OFF/ON and SECURITY with manual
disconnection.
12
REGULATIONS
Machine safety. Basic concepts, general principles for design. Part 1: Basic
terminology, methodology.
Machine safety. Basic concepts, general principles for design.
Part 2: Technical principles (ISO 12100-2:2003).
Machine safety. Safety distances in order to prevent reaching dangerous
zones with the upper and lower limbs (ISO 13857:2008).
Machine safety. Safety distances in order to impede reaching dangerous
zones with the upper limbs.
Industrial fans. fans mechanical safety.
Acoustics. Determination of the sound capacity level.
Mechanical vibrations. Balancing quality.
Mechanical vibrations. Evaluation of the machine vibrations