Description Of Accessories; Ec Declaration Of Conformity - Vortice L E Notice D'emploi Et D'entretien

DESCRIPTION OF ACCESSORIES

Gravity shutter
Prevents wind and rain from blowing in through the
appliance when switched off. The gravity shutter also
incorporates a safety mesh to prevent access to
contact with moving parts.
Safety mesh frame
Fits over the appliance's delivery inlet to prevent
accidental contact with moving parts if the appliance
is installed at an accessible height (fig. 4).
If necessary, fit a counter-frame between the safety
mesh frame and the external wall to maintain a gap of
at least 25 mm between the fan rotor and the mesh.
Spacer for panel mounting
Reduces the distance by which the appliance
protrudes outwards. Particularly useful to avoid
contact with security bars, roller blinds, etc..

EC DECLARATION OF CONFORMITY

VORTICE ELETTROSOCIALI S.p.A
Strada Cerca, 2 - frazione di Zoate
20067 TRIBIANO (MI) - ITALY
declares, under his own responsibility, that the
products in the range:
VORTICEL E
conform to European Directives
• CEE 98/37
• CEE 89/336
according to the following standards:
EN 292-1 (1991)
EN 292-2 (1991) + A1 (1995)
EN 60204-1 (1997)
EN 55014-1 (2000) + A1 (2001) + A2 (2002)
EN 55014-2 (1997) + A1 (2001)
EN 61000-3-2 (2000)
EN 61000-3-3 (1995) + A1 (2001)
12
Voltage regulator
3 position speed controllers.
IRM 30 single phase voltage regulator for models E
252 M, E 254 M, E 302 M, E 304 M, E 354 M, E 404
M, and E 454 M .
IRT 15 three phase voltage regulator for models E
254 T, E 302 T, E 304 T, E 354 T, E 404 T, E 454 T, E
504 T, E 506 T, E 604 T, and E 606 T.
Electronic speed controller
Speed controllers for single phase fans.
IREM 3 for models E 252 M, E 254 M, E 302 M, E
304 M, E 354 M, E 404 M, and E 454 M.
IREM 5 for one or more fans, up to a maximum of 5
A, for models E 252 M, E 254 M, E 302 M, E 304 M,
E 354 M, E 404 M, and E 454 M.
IREM 9 for one or more fans, up to a maximum of 9
A, for models E 252 M, E 254 M, E 302 M, E 304 M,
E 354 M, E 404 M, and E 454 M.
EN