Safety Instructions; Electrical Connection - ZANKER KOU10301 Notice D'utilisation

• Do not use a steam cleaner to clean the appliance.
• Before maintenance cut the power supply.
• Do not use harsh abrasive cleaners or sharp metal scrapers to clean the
glass door since they can scratch the surface, which may result in shattering
of the glass.

Safety instructions

Installation
Warning! Only a qualified person must install this
appliance.
• Remove all the packaging.
• Do not install or use a damaged appliance.
• Obey the installation instruction supplied with the ap-
pliance.
• Always be careful when you move the appliance be-
cause it is heavy. Always wear safety gloves.
• Do not pull the appliance by the handle.
• The kitchen cabinet and the recess must have suita-
ble dimensions.
• Keep the minimum distance from the other applian-
ces and units.
• Make sure that the appliance is installed below and
adjacent safe structures.
• Parts of the appliance carry current. Close the appli-
ance with furniture to prevent touching the dangerous
parts.
• The sides of the appliance must stay adjacent to ap-
pliances or to units with the same height.

Electrical connection

Warning! Risk of fire and electrical shock.
• All electrical connections should be made by a quali-
fied electrician.
• The appliance must be earthed.
• Make sure that the electrical information on the rating
plate agrees with the power supply. If not, contact an
electrician.
• Always use a correctly installed shockproof socket.
• Do not use multi-plug adapters and extension cables.
16
• Make sure not to cause damage to the mains plug
and to the mains cable. Contact the Service or an
electrician to change a damaged mains cable.
• Do not let mains cables to come in touch with the ap-
pliance door, specially when the door is hot.
• The shock protection of live and insulated parts must
be fastened in such a way that it cannot be removed
without tools.
• Connect the mains plug to the mains socket only at
the end of the installation. Make sure that there is ac-
cess to the mains plug after the installation.
• If the mains socket is loose, do not connect the
mains plug.
• Do not pull the mains cable to disconnect the appli-
ance. Always pull the mains plug.
• Use only correct isolation devices: line protecting cut-
outs, fuses (screw type fuses removed from the hold-
er), earth leakage trips and contactors.
• The electrical installation must have an isolation de-
vice which lets you disconnect the appliance from the
mains at all poles. The isolation device must have a
contact opening width of minimum 3 mm.
Use
Warning! Risk of injury, burns or electric shock or
explosion.
• Use this appliance in a household environment.
• Do not change the specification of this appliance.
• Make sure that the ventilation openings are not
blocked.
• Do not let the appliance stay unattended during oper-
ation.
• Deactivate the appliance after each use.
• Be careful when you open the appliance door while
the appliance is in operation. Hot air can release.