After Using The Appliance; Cleaning And Servicing - Bosch MUZ8NS1 Notice D'utilisation

en
Fitting attachments
for noodles
Insert attachment for dough

sheets (lasagne) into the
mincer and attach with the
threaded ring of the mincer.
Preparing dough
Place a cotton cloth, wooden

board or greaseproof paper
under the outlet opening –
the noodles will stick
to a base made of plastic
or porcelain.
Switch on appliance

(setting 5).
Noodles are most successful

when the noodle attachment
is warm: Run the first 30 cm
of noodles through the
mincer again and then pro-
cess the dough quickly.

After using the appliance

Switch off the appliance.

Remove mains plug.

Before disassembly, leave

the mincer and noodle
attachments to cool down.
Remove noodle attach-

ments in reverse sequence
as described above.
Clean individual parts, see


"Cleaning and servicing".

10
Cleaning and servicing
Warning!
Mincer and individual parts
are not dishwasher-proof.
Rinse individual parts by

hand and dry immediately.
Do not use metal implements

(nails, cutlery, etc.) to remove
residue.
Subject to alterations.
Robert Bosch Hausgeräte GmbH