Voice Dial Activation; Preset Dial - Sony DSX-A50BT Mode D'emploi

Press and hold  (MIC) to set to "EC/
NC-1" or "EC/NC-2."
Call transfer
You can switch between talking handsfree
(via this unit), or by the cellular phone.
Press  or use your cellular phone.
Notes
• For details on cellular phone operation, refer to
your cellular phone manual.
• Depending on the cellular phone, handsfree
connection may be cut off when call transfer is
attempted.

Preset dial

Contacts in the phonebook can be stored in
the preset dial (up to 4 on the main unit, or
6 on the remote commander).
1
Select a phone number that you want to
store in the preset dial, from the
phonebook, call history* or by
inputting the phone number directly.
The phone number appears in the
display of this unit.
* For the call history, you can also select from
the caller name. In this case, the caller name
appears in the display of this unit.
2
Press and hold a number button (
to  on the main unit, or  to 
on the remote commander) to select
the preset number to store until
"MEM" appears.
The contact is stored in the selected
preset number.
24

Voice dial activation

You can activate voice dialing with a cellular
phone connected to this unit by saying the
voice tag stored on the cellular phone, then
make a call.
1 Press  and rotate the control
dial until "VO DIAL" appears, then
press it.
2
Say the voice tag stored on the cellular
phone.
Your voice is recognized, and the call is
made.
Notes
• Check that the unit and cellular phone are
connected beforehand.
• Store a voice tag on your cellular phone
beforehand.
• If you activate voice dialing with a cellular
phone connected to this unit, this function may
not always work in some cases.
• Voice dialing may not work in some situations,
depending on the effectiveness of the cellular
phone's recognition function. For details, see
the support site on the back cover.
Tip
Store voice tags while seated in the car, via this
unit with "BT PHONE" source selected.