Symbols And Their Meaning; Product Description And Specifications; Intended Use; Product Features - Bosch GTS 635-216 Professional Notice Originale

34 | English

Symbols and their meaning

b
a
c
a The saw blade must be no more than 216 mm in dia-
meter.
b When changing the saw blade, make sure that the cutting
width is no smaller than 2.3 mm and the base blade thick-
ness is no larger than 2.1 mm. Otherwise, there is a risk
that the riving knife will hook into the workpiece.
c The riving knife is 2.2 mm thick.
d The cutting direction of the teeth (direction of the arrow
on the saw blade) must match the direction of the arrow on
the riving knife.
The riving knife is 2.2 mm thick.
The maximum possible workpiece height is 70 mm.
Left-hand side:
Indicates the direction of rotation of the crank for lowering
(transport position) and raising (work position) the saw
blade.
Right-hand side:
Indicates the position of the locking lever for securing the
saw blade and setting the bevel angle (saw blade can be
swivelled).
Protection class II power tools are
strengthened or double-insulated.
The CE mark provides confirmation from
the manufacturer that the power tool
complies with the applicable EU Direct-
ives.
1 609 92A 4PA | (01.03.2019)
Product Description and
Specifications
Keep all the safety information and general instructions
for future reference.
d

Intended use

The power tool is a stationary machine for cutting in a
straight line with and against the grain in hardwood, soft-
wood, chipboard and fibreboard. Mitre angles of -30° to
+30° as well as bevel angles of 0° to 45° are possible.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Scale for spacing between saw blade and parallel
guide
(2) Angle guide
(3) Protective cover
(4) Riving knife
(5) Parallel guide
(6) Saw table expansion
(7) Angle guide storage compartment
(8) Mounting holes
(9) Ring spanner (24 mm; 23 mm)
(10) Hex key (5 mm)
(11) Bracket for storing the protective cover
(12) Push stick
(13) Clamping handle for saw table expansion
(14) Hand wheel
(15) Crank for raising and lowering the saw blade
(16) Safety flap for the on/off switch
(17) Stop for 45° bevel angle
(18) Locking lever for setting the bevel angle
(19) Scale for bevel angles
Stop for 0° bevel angle
(20)
(21) Saw table
(22) Adjusting screw for adjusting the clamping force of
the parallel guide
(23) Table insert
(24) Saw blade
(25) Guide groove for parallel guide
Cable holder
(26)
(27) Carrying handle
Read all the safety information and general
instructions. Failure to observe the safety in-
formation and general instructions may result
in electric shock, fire and/or serious injury.
Bosch Power Tools