Symbols And Their Meaning - Bosch GCM 12 GDL Professional Notice Originale

Do not make any modifications to the laser equip-
u
ment. The setting options described in these operating
instructions can be used safely.
Do not direct the laser beam at persons or
animals and do not look directly into the
laser beam or at its reflection. Doing so
could lead to blindless, or could cause acci-
dents or damage to the eyes.
Warning! If operating or adjustment devices other
u
than those specified here are used or other proced-
ures are carried out, this can lead to dangerous expos-
ure to radiation.
Symbols
The following symbols may be important for the operation of
your power tool. Please take note of these symbols and their
meaning. Correctly interpreting the symbols will help you to
operate the power tool more effectively and safely.

Symbols and their meaning

Laser class 1
Keep hands away from the cutting
area while the power tool is running.
Contact with the saw blade can lead to
injuries.
Wear a dust mask.
Wear safety goggles.
Wear hearing protection. Exposure
to noise can cause hearing loss.
Danger area! Keep hands, fingers
and arms away from this area.
Keep your fingers away from the
moving parts of the glide arm. There
is a risk of fingers being crushed and
severely injured.
Bosch Power Tools
Symbols and their meaning
Take note of the dimensions of the saw
30
Ø
305 mm
Ø
mm
blade. The hole diameter must fit the
tool spindle without play. If it is neces-
sary to use reducers, ensure that the
dimensions of the reducer are suitable
for the base blade thickness and the
saw blade hole diameter, as well as the
tool spindle diameter. Wherever pos-
sible, use the reducers provided with
the saw blade.
The saw blade diameter must match
the information specified on the sym-
bol.
When transporting the power tool,
hold it only at the locations indicated
(recessed handles) or by the transport
handle.
Never carry the power tool using the
handle of the glide arm.
Switching on the laser
Clamping handle open:
Bevel angles can be adjusted.
Clamping handle closed:
The set bevel angle of the glide arm is
locked.
Indicates the individual steps for ad-
justing the bevel angle.
1. Loosen the clamping handle
2. Swivel the glide arm slightly to the
left
3. Set the required bevel angle range
using the rotary knob
Setting the bevel angle ranges using
the rotary knob:
Saw blade inclination to the left (45° to
0°)
Saw blade inclination to the right (0° to
45°)
Entire swivel range of the glide arm (–
47° to +47°)
English | 33
1 609 92A 4CT | (20.07.2018)