Bosch GCM 12 GDL Professional Notice Originale page 35

(70) Set screw for 45° basic setting (left-hand bevel
angle)
(71) Set screw for 45° basic setting (right-hand bevel
angle)
Set screws for mitre angle scale
(72)
(73) Screw for mitre angle indicator
Technical Data
Sliding mitre saw
Article number
Rated power input
Rated voltage
Frequency
No-load speed
Starting current limitation
Laser type
Laser class
Weight according to EPTA-Procedure
01:2014
Protection class
Dimensions of suitable saw blades
Saw blade diameter
Base blade thickness
Max. cutting width
Hole diameter
Permitted Workpiece Dimensions (maximum/minimum): (see "Permissible workpiece dimensions", page 40)
Noise information
Noise emission values determined according to EN
62841-3-9.
Typically, the A-weighted noise level of the power tool is:
Sound pressure level 93 dB(A); sound power level
106 dB(A). Uncertainty K = 3 dB.
Wear hearing protection
The noise emission value given in these instructions has
been measured in accordance with a standardised measur-
ing procedure and may be used to compare power tools. It
may also be used for a preliminary estimation of noise emis-
sions.
The noise emission value given represents the main applica-
tions of the power tool. However, if the power tool is used
for other applications, with different application tools or is
poorly maintained, the noise emission value may differ. This
may significantly increase noise emissions over the total
working period.
To estimate noise emissions accurately, the times when the
tool is switched off, or when it is running but not actually be-
Bosch Power Tools
(74) Set screw for adjusting the clamping force of the
clamping handle for any bevel angle
(75) Hook-and-loop strap
A) Accessories shown or described are not included with the
product as standard. You can find the complete selection of
accessories in our accessories range.
GCM 12 GDL
3 601 M23 601
3 601 M23 631
3 601 M23 671
W 2000
V 230–240
Hz 50/60
rpm 4000
●
nm 650
mW < 1
1
kg 32.1
/ II
mm 305
mm 1.7−2.6
mm 3.2
mm 30
ing used, should also be taken into account. This may signi-
ficantly reduce noise emissions over the total working
period.
Assembly
Avoid starting the power tool unintentionally. The
u
mains plug must not be connected to the power supply
during assembly or when carrying out any kind of
work on the power tool.
Items Included
Carefully remove all parts included in the delivery from their
packaging.
Remove all packing material from the power tool and the ac-
cessories provided.
Check to ensure that all the parts listed below have been
supplied before using the power tool for the first time:
– Sliding mitre saw with mounted saw blade (40)
– Locking knob (11)
– Hex key (17)
English | 35
GCM 12 GDL GCM 12 GDL
3 601 M23 661 3 601 M23 691
3 601 M23 6P1
1500
110 220–240
50/60
4000
–
650
< 1
1
32.1
/ II
305
1.7−2.6 1.7−2.6
3.2
30
1 609 92A 4CT | (20.07.2018)
1800
50/60
4000
●
650
< 1
1
32.1
/ II
305
3.2
30