Product Description And Specifications; Intended Use; Product Features - Bosch GCM 12 GDL Professional Notice Originale

34 | English
Product description and
specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.

Intended use

The power tool is intended as a stationary machine for mak-
ing straight cuts in wood with and against the grain. It is pos-
sible to cut mitre angles of -52° to +60° and bevel angles of
47° (to the left) to 47° (to the right).
The power tool is designed with sufficient capacity for saw-
ing hardwood and softwood as well as chipboard and fibre-
board.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product features

The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Handle
(2) Lock-off switch for on/off switch
(3) Protective guard
(4) Retracting blade guard
(5) Adjustable fence
(6) Fence
(7) Saw table extension
(8) Mounting holes
(9) Insert plate
(10) Locking clamp
(11) Locking knob for various mitre angles
(12) Mitre presetting lever
(13) Clamping handle for various bevel angles
A)
(14) Spacer
(15) Detents for standard mitre angles
(16) Recessed handles
(17) Hex key (6 mm/4 mm)
(18) Hex key (2 mm)
(19) Screw clamp
(20) Roller
(21) Angle indicator for right-hand bevel angle range (0°
to 47°)
(22) Chip deflector
(23) Chip ejector
(24) Dust extraction adapter
(25) Glide mechanism clamping lever
(26) Laser warning label
1 609 92A 4CT | (20.07.2018)
(27) Laser protection cap
(28) Glide arm
(29) Adjusting screw of depth stop
(30) Depth stop
(31) Transport safety lock
(32) Scale for bevel angle
(33) Angle indicator for left-hand bevel angle range (47°
to 0°)
(34) Adjustment knob for 22.5° bevel angle
(35) Locking screw for length stop
A)
(36) Length stop
(37) Scale for mitre angle
(38) Saw table
(39) Rotary knob for adjusting the bevel angle range
(40) Saw blade
(41) Laser beam outlet aperture
(42) Locking screw for the linkage of the retracting blade
guard
(43) Linkage of the retracting blade guard
(44) Front fastening screw
(cover plate/retracting blade guard)
(45) Rear fastening screw
(cover plate/retracting blade guard)
(46) Cover plate
(47) Spindle lock
(48) Hex socket screw for mounting of saw blade
(49) Clamping flange
(50) Interior clamping flange
(51) Clamping lever of the saw table extension
(52) Locking screw for the adjustable fence
(53) Damper
(54) Set screws for damping
(55) Holes for screw clamp
(56) Wing bolt
(57) Threaded rod
(58) Angle indicator for mitre angles
(59) On/off switch
(60) On/off switch for laser (cutting line indication)
(61) Screws for insert plate
(62) Clamping screw for length stop
(63) Screw for laser protection cap
(64) Set screw for positioning the laser (flush levelling)
(65) Fastening screw for laser mounting plate
(66) Fastening screw for laser housing
(67) / Set screws for 0° basic setting (bevel angle)
(68) /
(69)
A)
A)
Bosch Power Tools