Product Description And Specifications - Bosch GCM 10 MX Professional Notice Originale

Product Description and
Specifications
Read all the safety and general instructions.
Failure to observe the safety and general in-
structions may result in electric shock, fire
and/or serious injury.
Please observe the illustrations at the beginning of this oper-
ating manual.
Intended Use
The power tool is intended as a stationary machine for mak-
ing straight lengthways and crossways cuts. It is possible to
cut mitre angles of –47° to +52° and bevel angles of 0° to
45°.
The power tool is designed with sufficient capacity for saw-
ing hardwood, softwood, chipboard and fibreboard, as well
as aluminium and plastic.
Product Features
The numbering of the product features refers to the diagram
of the power tool on the graphics page.
(1) Protective guard
(2) Lever for releasing the tool arm
(3) Handle
(4) On/off switch
(5) Retracting blade guard
(6) Fence
(7) Saw table
(8) Holes for screw clamp
(9) Insert plate
(10) Locking knob for all mitre angles
(11) Mitre pre-setting lever
(12) Angle indicator for mitre angles
(13) Scale for mitre angles
(14) Mounting holes
(15) Recessed handles
(16) Drill holes for extension bars
(17) Adjustable fence
(18) Screw clamp
(19) Dust bag
(20) Chip deflector
(21) Wing bolt for fixing the adjustable fence
Hex key (6 mm)/cross-headed screwdriver
(22)
(23) Stop screw for 45° bevel angle
(24) Tilt protector
(25) Chip ejector
(26) Clamping handle for all bevel angles
(27) Transport safety lock
(28) Transport handle
Bosch Power Tools
(29) Spindle lock
(30) Depth stop adjusting screw
(31) Angle indicator for bevel angles
(32) Scale for bevel angles
(33) Stop screw for 0° bevel angle
(34) Holes for tilt protector
(35) "Tilt protector" fastening set
(36) Extension bar
(37) Fastening screw for extension bar
(38) Cross-head screw (retracting blade guard attach-
ment)
(39) Hex socket screw for mounting the saw blade
(40) Clamping flange
(41) Saw blade
(42) Inner clamping flange
(43) Wing bolt for adjusting the height of the threaded
rod
(44) Threaded rod
(45) Detents for standard mitre angles
(46) Screws for insert plate
(47) Hex socket screw for fence
(48) Screw for bevel angle indicator
Technical Data
Mitre saw
Article number
Rated power input
No-load speed
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
Permitted workpiece dimensions (maximum/minimum): (see "Per-
missible workpiece dimensions", page 27)
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Only for power tools without starting current limitation: Switching
these on causes the voltage to drop briefly. Other tools may be ad-
versely affected by these if the conditions in the electricity supply are
unfavourable. Malfunctions are not to be expected for system imped-
ances below 0.209 ohm.
Dimensions of suitable saw blades
Saw blade diameter
Base blade thickness
Hole diameter
Noise Information
Noise emission values determined according to EN
62841-3-9.
English | 23
GCM 10 MX
3 601 M29 02.
3 601 M29 0P.
W 1700
-1
min 4800
kg 16.8
/ II
mm 254
mm 1.8−2.8
mm 30
1 609 92A 5U4 | (07.10.2020)