Product Description And Specifications; Intended Use; Product Features - Bosch GCM 12 JL Professional Notice Originale

OBJ_BUCH-1600-005.book Page 29 Friday, December 16, 2016 9:23 AM
Symbols and their meaning
For adjustment of random
mitre angles, the saw table
must move freely and the
mitre detent override must be
blocked:
– Pull lever  and at the
Clamping lever shut:
The set bevel angle of the tool
arm is locked.
Clamping lever open:
Adjusting bevel angles is
possible.
Product Description and
Specifications
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in hard and soft-
wood, as well as in particle and fibre board. In this, mitre
angles from –52° to +52° as well as bevel angles from –2° to
+47° are possible.
When using appropriate saw blades, sawing aluminium pro-
files and plastic is also possible.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Dust bag
2 Extraction adapter
3 Auxiliary transport handle
4 Handle
5 Retracting blade guard
6 Fence
7 Movable distance-stop
8 Mounting holes
9 Locking knob for various mitre angles
10 Mitre detent lever
11 Mitre detent override
12 Mitre angle indicator
13 Scale for mitre angle
14 Clamping lever of the saw-table extension
15 Saw-table extension
Bosch Power Tools
16 Recessed handles
17 Hex key (6 mm/4 mm)
18 Adjustable fence
19 Stop for 45° and 33.9° standard bevel angle
20 Transport safety-lock
21 Spindle lock
22 Lever for releasing the tool arm
same time push the mitre
23 Clamping lever for any bevel angle
detent override  down-
24 Scale for bevel angle
ward at the front.
25 Indicator for bevel angle
26 Stop for 0° standard bevel angle
27 Material stop
28 Lock screw of the material stop
29 Detents for standard mitre angles
30 Saw table
31 On/Off switch for laser (cutting line indication)
32 Laser warning label
33 On/Off switch
34 Blade guard
35 Laser protection cap
36 Cover plate
37 Saw blade
38 Roller
39 Insert plate
40 Material clamp
41 Clamping lever of the adjustable fence
42 Mounting holes for material clamp
43 Chip deflector
44 Tilt-protector bar
45 Transport handle
46 Chip ejector
47 "Tilt-protector bar" fastening set
48 Front fastening screw
49 Hex socket screw for mounting of saw blade
50 Clamping flange
51 Interior clamping flange
52 Cover plate tab
53 Threaded rod
54 Wing bolt
55 Clamping screw of the material stop
56 Screws for insert plate
57 Adjustment screw for laser position (parallelism)
58 Screw for bevel angle indicator
59 Stop screw for 0° bevel angle
60 Stop screw for 45° bevel angle
61 Set screws of scale 13 for mitre angles
62 Screw for mitre angle indicator
63 Velcro strap
64 Exit opening for laser beam
Accessories shown or described are not part of the standard deliv-
ery scope of the product. A complete overview of accessories can
be found in our accessories program.
(cover plate/retracting blade guard)
1 609 92A 348 | (16.12.16)
English | 29