Product Description And Specifications; Intended Use; Product Features - Bosch PCM 7 S Notice Originale

All manuals and user guides at all-guides.com
OBJ_BUCH-1270-002.book Page 22 Wednesday, July 23, 2014 2:50 PM
22 | English
Symbols
The following symbols can be important for the operation of
your power tool. Please memorise the symbols and their
meanings. The correct interpretation of the symbols helps
you operate the power tool better and more secure.
Symbol Meaning
 Wear a dust respirator.
 Wear safety goggles.
 Wear ear protectors. Exposure to noise
can cause hearing loss.
 Keep hands away from the cutting ar-
ea while the machine is running. Dan-
ger of injury when coming in contact
with the saw blade.
Laser Radiation
Do not stare into beam
Class 2 laser product
30 mm
Observe the dimensions of the saw blade.
The hole diameter must match the tool
spindle without play. Do not use reducers
or adapters.
 Danger area! Keep hands, fingers or
arms away from this area.
The transport safety-lock 29 enables easier
handling of the machine when transporting
to various working locations.
– Transport safety-lock 29 pushed
completely inward:
Securing the Machine
(Transport Position)
– Transport safety-lock 29 pulled
completely outward:
Releasing the Machine
(Working Position)
1 609 92A 0VM | (23.7.14)
Symbol Meaning
Do not dispose of power tools into house-
hold waste!
Only for EC countries:
According to the European Guideline
2012/19/EU for Waste Electrical and Elec-
tronic Equipment and its implementation
into national right, power tools that are no
longer usable must be collected separately
and disposed of in an environmentally cor-
rect manner.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.

Intended Use

The power tool is intended as a stationary machine for making
straight lengthways and crossways cuts in wood. In this, mitre
angles from –47° to +47° as well as bevel angles from 0° to
45° are possible.
The capacity of the power tool is designed for sawing hard-
wood and softwood.
The power tool is not suitable for cutting aluminium or other
non-ferrous metals or alloys.

Product Features

The numbering of the components shown refers to the repre-
sentation of the power tool on the graphic pages.
1 Handle
2 Laser warning label
3 Lever for releasing the tool arm
4 Blade guard
5 Retracting blade guard
6 Roller
7 Mounting holes
8 Saw table
9 Locking knob for various mitre angles
10 Tilt protector
11 Insert plate
12 Mitre angle indicator
13 Scale for mitre angle
14 Saw-Table extension
15 Fence
16 Material clamp
17 Bevel lock lever
18 Depth stop
19 Dust bag
20 On/Off switch
Bosch Power Tools