Operation Via Mobile Application; User Modes; Exhaust Mode; Recirculation Mode - Novy Panorama 120 Pro 4 Mode D'emploi

5.2 Operation via mobile application

This cooker hood can also be remotely controlled via a mobile
device. Is the Novy application on your mobile device installed,
then you can connect it to the cooker hood. When the cooker
hood is not connected to the mobile device itself, the cooker
hood can be operated in the normal way using the remote
control of the cooker hood itself.
Set up
To use the Novy application for your cooker hood and appliance
installation you will need the following:
– The cooker hood must be connected to the mains power
supply and to be turned on.
– A smartphone or tablet with a current version of iOS or
Android operating system.
– Download the Novy application through your favourite app
store. Your cooker hood and mobile device should be within
range of each other
The application will guide you through the entire procedure.
Follow the clues in the application.

5.3 User modes

This device can be used in the exhaust or recirculation mode
(standard setting upon delivery)

5.3.1 Exhaust mode

The air sucked in is first cleaned by the grease filters before
being removed to the outside. This can be achieved by making
use of a series of channels connected between the device and
a wall exhaust cover.
To set the device in exhaust mode, press and hold the key
+
‐
combination and and
extraction tower is closed.
The led next to the Cleaning indication for recirculation filter will
blink 3x.

5.3.2 Recirculation mode

The air sucked in is first cleaned by the grease filters. The scents
are then removed in the recirculation filter before re-entering the
kitchen.
To set the device in recirculation mode (default setting), press
and hold the key combination
when the extraction tower is closed.
for 3 seconds when the
+
‐
and and for 3 seconds
The led next to the Cleaning indication for recirculation filter will
be on for 3 seconds.

INFO: Provide adequate ventilation in the kitchen
for optimal effi ciency of the recirculation system.

5.4 Controlling the extraction tower


WARNING: When the extraction is activated,
the extraction tower automatically rises to
the desired height at the rear of the induction
hob. Therefore, ensure nothing can hinder its
movement.
Switch on 10 cm
Briefly press
Switch on 30 cm
Press and hold
Switch AUTO on 20 cm
Press
Switch on run-out function
Press and hold
Switch off
Briefly press
Other positions of the extraction tower: The extraction tower
can be set in 3 different standard positions: 10, 20 and 30 cm
via the and
If you wish to choose an intermediate height yourself, you can
stop the suction tower at any position while the extraction tower
is moving.
Press the button if the extraction tower moves upwards,
or if it moves downwards.
AUTO function: Preset function where the extraction tower
immediately comes into position at the most common cooking
height of 20 cm. The extraction mode 5 (3rd led) is automatically
set.
– 58 –
Extraction tower:
for 2 seconds
for 2 seconds
buttons.
Display
LED
lights up
LED
lights up
LED
lights up
LED
blinks
LED
off