Global Overview; Control Panel; Use Of The Unit; Sensitive Touch - Novy 1811 ONE Mode D'emploi

3.4 Global overview

1
5
6
5
4
1
Induction cooking plate
2
Suction tower
3
Valve operation
4

Operation of the cooking plate

5
Operation of the cooking zones
6
Operation of the extraction
7
Fat filters (in the suction tower)

3.5 Control panel

11
12
10
1
On/off key for the cooking plate
2
Stop & Go key
3
Locking key
4
Timer key
5
Timer indication
6
Zone for slider operation and timer (front zone)
7
Power level indication
8
Bridge lamp
9
Timer lamp
10
Key for keeping warm
11
Lamps for keeping warm
12
Operation of the rear cooking zone
6
5
1 2
1
Switch on and off and run-out function
2
Decrease the extraction power
3
Increase the extraction power
7
2
3
7 8 9 5
4
6 3 1 2
7
4
3
4
Low position of extraction
5
Indication of power levels for extraction
6
Cleaning indication for fat filter
7
Cleaning indication for recirculation filter

4 USE OF THE UNIT

4.1 Sensitive touch

Your ceramic hob is equipped with electronic controls
with sensitive touch keys. When your finger presses
the key, the corresponding command is activated. This
activation is validated by a control light, a letter or a
number in the display and/or a "beep" sound.
In the case of a general use press only one key at
the same time.
To select the power with the slider, slide your finger on
the "SLIDER" zone. You can already have a direct ac-
cess if you put your finger directly on the chosen level.
4.2 Operation of the cooking plate

4.2.1 Starting-up

Start up / switch off the hob:
Actie Control panel
To start press key [0/I]
To stop press key [0/I]
Start up / switch off a heating zone:
Actie Control panel
To set slide on the "SLIDER"
(adjust the to the right or to the left
power)
To stop slide to [ 0 ] on "SLIDER" [ 0 ] or [ H ]
If no action is made within 20 second the electronics
returns in waiting position.

4.2.2 Pan detection

The pan detection ensures a perfect safety. The induc-
tion doesn't work:
• If there is no pan on the heating zone or if this pan is
not adapted to the induction. In this case it is impos-
sible to increase the power and the display shows [
U ]. This symbol disappears when a pan is put on the
heating zone.
• If the pan is removed from the heating zone the ope-
ration is stopped. The display shows
symbol [ U ] disappears when the pan is put back
to the heating zone. The cooking continues with the
power level set before.
Display
[ 0 ]
nothing or [ H ]
Display
[ 0 ] to [ 9 ]
[ U ]. The
EN 38