Automatic Cooking; Stop&Go Function; Recall Function; Keep Warm" Function - Novy 1811 ONE Mode D'emploi

Action Control panel
Activate the press display [ 0/I ]
hob
Select the Press simultaneously
Timer key [ - ] and [ + ] from
the timer
Decrease Press key [ - ] from the
the time timer
Increase the Press key [ + ] from the
time timer
Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the
timer displays blinking [ 000 ] and a sound rings.
To stop the sound and the blinking, press the key [ - ]
and [ + ].

4.2.6 Automatic cooking

All the cooking zones are equipped with an automatic
cooking device. The cooking zone starts at full power
during a certain time, and then reduces automatically
its power on the pre-selected level.
Start-up:
Action Control panel
Power level slide on the "SLIDER" to
selection [ 7 ] and stay 3s
(for example
« 7 »)
Switching off the automatic cooking:
Action Control panel
Power level slide on the "SLIDER"
selection
4.2.7 Stop&Go function
This function brakes all the hob's cooking activity tem-
porarily and allows restarting with the same settings.
Start up/stop the pause function:
Action Control panel
Engage press [ II ]
pause
Stop the press [ II ]
pause
Press on the animated
"slider"

4.2.8 Recall Function

After switching off the hob ( 0/I ), it is possible to recall
the last settings.
• cooking stages of all cooking zones (Booster)
• minutes and seconds of programmed cooking zone-
related timers
• Keep warm function
• Automatic cooking
The recall procedure is following:
• Press the key [0/I]
Display
• Then press [ II ] before the light stops blinking.
[ 0 ]
The previous settings are again active.
[ 000 ]

4.2.9 "Keep warm" Function

This function allows the reach and automatically main-
[ 60 ] to 59,
tains at the temperature of 42, 70 or 94°C.
58...
This will avoid liquids overflowing and fast burning at
Time in-
the bottom of the pan.
crease
To engage, to start the function "Keep warm":
Action
42°C to en-
gage
70°C to en-
gage
94°C to en-
gage
To stop
The maximum duration of keeping warm is 2 hours.

4.2.10 Bridge and automatic Bridge Function

Display
This function allows the use of 2 cooking zones at the
[ 7 ] is blink-
same time with the same features as a single cooking
ing with [ A ]
zone. With this function the Booster function is allowed
on the left and right zones.
Action
Activate the
hob
Display
Activate the
[ 0 ] to [ 9 ]
bridge
Increase
bridge
Stop the
bridge

4.2.11 Grill Function

Display
[ II ] and
This function allows the optimal use of the grill plate
control light
with combining two areas and using appropriate pow-
on
ers.
"Slider"
animated
Action
previous
Activate the
settings
hob
Activate the
Grill
Increase the
Grill
Stop the
Grill
Control panel
Press once on key [Keep
warm ]
Press twice on key [Keep
warm ]
Press 3 times on key
[Keep warm ]
Slide on the "SLIDER"
or press key [Keep warm
] until [ 0 ]
Control panel
Press display [ 0/I ]
Press simultaneously
on [ Keep warm key ]
of the 2 cooking zones
Slide on the "SLIDER"
witch indicates the
power
Press simultaneously
on [ Keep warm key ]
f the 2 cooking zones
Control panel
Press display [ 0/I ]
put the grill plate on the
2 zones to use
Press simultaneously on
the « SLIDER » of the 2
cooking zones
Slide on the "SLIDER"
witch indicates the
power
Press simultaneously on
the « SLIDER » of the 2
cooking zones
Display
[ U ] and
[ ]
[ U ] and
[ ]
[ U ] and led
[ ]
[ 0 ] to [ 9 ]
[ 0 ]
Display
[ 0 ]
[ 0 ] and [ ]
[ 1 to 9 ]
[ 0 ]
Display
[ 0 ]
[ ] blink
[ ]
power level
on the
slider
[ 0 ]
EN 40