Publicité
Les langues disponibles
Les langues disponibles
Switching extraction off with delay mode
To set delay mode press button
The first white engine speed LED flashes. The engine
continues to run for 30 minutes in post-ventilation mode.
After this time, the motor will switch off. The lighting will
remain on in the cooking mode.
Make use of the delay time of 30 minutes so that the cook-
ing odours can be absorbed well in the monoblock filter.
Switching extraction off without delay mode
Press button
twice.
Auto-Stop
To prevent the cooker hood from being left on, the motor is
automatically switched off after 3 hours (only if the control
has not been changed during the 3 hours).
The lighting will remain on in mood mode.
The motor has a thermal switch that switches
the motor off with overheating. After cooling
the motor will switch on again. Determining the
cause of overheating is required. This can be
caused for example by a pan fire, the impeller
motor being blocked or an object getting in the
exhaust opening and causing it to be partly or
fully blocked.
2.3 Lighting
With respect to the lighting you can choose between the
cooking mode and the mood mode. The light workt inde-
pendent of the motor.
Cooking mode
The cooking mode provides optimum lighting for cooking.
Press key
or
key to switch the cooking mode on or off.
Cooking mode light intensity
When the cooking mode is active, you can dim or intensify
the light by pressing
. Release key
light intensity has been reached.
You cannot fully dim the light of the cooking
mode, because then there will not be sufficient
light to cook.
Change the colour temperature in the cooking mode
You can change the colour temperature into cold light by
simultaneously pressing keys
Release both keys when the required colour temperature
has been reached.
You can change the colour temperature into warm light by
simultaneously pressing keys
Release both keys when the required colour temperature
has been reached.
After having switched off the cooking mode, the last set
value will always be remembered. In this way your prefer-
ence will be used every time when switching on the hood.
once.
when the required
and
for 4 seconds.
and
for 4 seconds.
– 36 –
Mood mode
The mood mode provides optimum lighting for creating
a nice atmosphere.
The lighting in mood mode includes the 4 corner lights and
the uplight lighting on top of the cooker hood.
To switch the ambience mode on or off, press button 5.
The intensity of the 4 corner spots and the
uplight lighting can be adjusted independently
via the Novy mobile application (Novy Connect
app).
2.4 Remote control
The remote control for hood is preinstalled and ready for use.
Change the code on the remote control
If the set code disrupts other transmitters, another code
can be selected using the remote control. There are 10
different codes.
Determine the code used
On the remote control, briefly press the buttons
at the same time. The lamp on the remote control flashes
as many times as the selected code (there are 10 code
options in total).
Change the code
− Press (approx. 3 seconds) simultaneously on the buttons
and
of the remote control until the green LED on
the remote control starts flashing .
− The green LED on the remote control flashes as many
times as the new set code (= old code + 1). If another
code is desired repeat this step again (1x flashing is code
1, 2x flashing is code 2 etc. There are 10 codes in total).
− Link the remote control to the cooker hood using the
pairing button. The black pairing button is located at the
top of the cooker hood on the side of the power cord.
Press the black pairing button and the pairing mode is
then active for 3 minutes.
− Within 3 minutes, press the button
control to confirm the pairing. The cooker hood and the
remote control are now set to each other.
and
on the remote
Publicité
Chapitres
