Monoblock Recirculation Filter; Change The Batteries - Novy Phantom Cable Mode D'emploi

Resetting the cleaning indicator
When you replace the grease filter after cleaning,all you
have to do is press the [ ] and [ ] keys simultaneously
for 5 seconds to reset the replacement indicator.
If you do not do this, the orange indicator lights up when
the camera is turned on.

3.4 Monoblock recirculation filter

When selecting recirculation, always set the recirculation
programme on the extractor hood (see paragraph 2.4)
If recirculation is chosen the appliance is connected to an
outlet box with a monobloc recirculation filter.
Replacement indicator monoblock filter

Indication: orange indicator lamp starts burning
After a fixed period of time, an orange light on the unit
indicates that the monoblock recirculation filter needs to
be changed.
Access to the monoblock filter
The monoblock filter is located at the top of the cooker
hood.
Carefully remove the monoblock filter from the metal fil-
ter holder by sliding the filter to one side.
It is possible that the power cable may block the sliding
out of the filter. The power cable is fixed with a strap on
a strap holder. Loosen this first.
Reinstalling the monoblock filter
Carefully slide the monoblock filter back into the holder
at the top of the cooker hood. If necessary, replace the
strap on the strap holder.
7540_G2
Reset the replacement indicator
When you replace the new monoblock filters, all you
have to do is press the [ ] and [ ] keys simultaneously
for 5 seconds to reset the replacement indicator.
If you do not do this, the orange indicator lights up when
the camera is turned on.

You can obtain a new monobloc filter from
a dealer or the Novy website. Article number
monoblock filter: 7300.055.

3.5 Change the batteries

− For changing the batteries unscrew the plastic cover,
remove the old batteries and insert the new ones. Pay
attention to the polarity marking given in the battery
compartment.
− Empty batteries are not to be disposed of in the household
refuse, but they are to be handed in as chemical waste.
Technical information
− Power supply: 2xAAA batteries
− Frequence: 433.92Mhz
− Numbre of codes: 10
− Worktemperature: 0-50°C
− Dimensions: 110 x 50 x 19mm
– 39 –