Automatic Cooking - Novy 1763 Mode D'emploi Et D'installation


To stop the cooking time:
Example for 13 minutes at level 7 :
Action
Zone selection
Select « Timer »
Desactivate the units
Valid the units
Desactivate the tens
Valid the tens

Automatic stop at the end of the cooking time:
As soon as the selected cooking time is finished the timer displays blink [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the key [ 00 ].

Egg timer function :
Example for 29 minutes :
Action
Activate the hob
Select« Timer »
Set the units
Valid the units
Set the tens
Valid the tens
After a few seconds the control light stops blinking.
As soon as the selected cooking time is finished the timer displays blink [ 00 ] and a sound rings.
To stop the sound and the blinking it is enough to press the display [ 00 ]. The hob switches off.

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power during a certain time, then reduces automatically its power on the pre-selected level.
 Start-up :
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
 Switching off the automatic cooking :
Action
Zone selection
Power level selection
Control panel
Press display [ 7 ] selected
Press key [ 13 ]
Slide on the "SLIDER" to [ 0 ]
Press display [ 10 ]
Slide on the "SLIDER" to [ 0 ]
Press display [ 00 ]
Control panel
Press display [ 0/I ]
Press display [ CL ]
Slide on the "SLIDER" to [ 9 ]
Press display [ 09 ]
Slide on the "SLIDER" to [ 2 ]
Press display [ 29 ]
Control panel
Press display [ 0 ] selected
Slide on the "SLIDER" to [ 9 ]
Re-press on display "SLIDER" [ 9 ]
Slide on the "SLIDER" to [ 7 ]
Control panel
Press [ 7 ] from the zone
Slide on the "SLIDER"
56
Display
[ 7 ] and control light on
[ 13 ]
[ 1 fixed ] [ 0 blinking ]
[ 1 blinking ] [ 0 fixed ]
[ 0 blinking ] [ 0 fixed ]
[ 00 ]
Display
Zone control lights are on
[ 00 ]
[ 0 fixed ] [ 9 blinking ]
[ 0 blinking ] [ 9 fixed ]
[ 2 blinking ] [ 9 fixed ]
[ 29 ]
Display
[ 0 ] and control light on
Pass from [ 0 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] pass to [ 8 ] [ 7 ]
[ 7 ] is blinking with [ A ]
Display
[ 7 ] blinking
with [ A ]
[ 1 ] to [ 9 ]