Start-Up And Use - SCHOLTES BC 199DT P XA S Mode D'emploi

Masquer les pouces Voir aussi pour BC 199DT P XA S:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Start-up and use

GB
pull (2).
! The first time you use your appliance, heat the empty oven with
its door closed at its maximum temperature for at least half an
hour. Make sure that the room is well ventilated before switching
the oven off and opening the oven door. The appliance may emit
a slightly unpleasant odour caused by protective substances
used during the manufacturing process burning away.
! Never put objects directly on the bottom of the oven; this
will prevent the enamel coating from being damaged.
! Always place cookware on the racks provided.
! During operation, we recommend the removal of any crockery
or delicate foodstuffs from the cavities not being used.
! We recommend that you do not open the door when
cooking foodstuffs which require proving, so as to not
compromise cooking results.
! Once the cooking programme has begun, before the DIVIDER
is removed, the oven must be switched off using the
!
If you press the
,
period of time, you will be able to scroll through the options
on various lists or set values more quickly.
! Every time the oven is switched on it is set to the
UNIVERSAL menu.
! If no button is pressed within 2 minutes of its activation,
the display will switch off automatically.
Cooling ventilation
In order to reduce the external temperature of the oven,
a cooling fan generates a stream of air which escapes
underneath the oven control panel.
! Once cooking has been completed, the cooling fan
activates and deactivates automatically until the oven has
cooled down sufficiently.
Oven light
When the oven is not in operation, the light may be switched
on at any time by opening the oven door.
Switching the oven on for the first time
After connecting the oven to the electricity supply, the first time
it is switched on the user should also switch on the control
panel by pressing the
appear in the menu. To choose the desired language, select
it using the
and
buttons. Press the "OK" button to confirm.
Once the selection has been made, the display will show
the following parameters:
LANGUAGE
TIME
TONE
MINUTE MINDER
PYROLYTIC
30
WARNING! The oven is
provided with a stop system
to extract the racks and
prevent them from coming
out of the oven (1).
As shown in the drawing,
to extract them completely,
simply lift the racks, holding
them on the front part, and
,
and
buttons for an extended
button. The list of languages will
Select language
Set the time
Keypad tone
Set the minute minder
Select the PYROLYTIC cycle
EXIT
Exit the menu
! After choosing the language in the menu, if the display is
not used for another 60 seconds it will automatically revert
to the UNIVERSAL menu.
Setting the clock
To set the clock, switch on the oven by pressing the
then press the "MENU" button and follow the steps described.
1. Select the TIME command and press "OK" to begin
modifying the value.
2. The 4 numerical digits will begin to flash.
3. Adjust the values using the
4. Press the "OK" button to confirm.
Setting the minute minder
The minute minder may be set whether the oven is switched
on or off.
When the oven is switched off:
1. Press the "MENU" button.
2. The 4 numerical digits will begin to flash.
3. Adjust the values using the
4. Press the "OK" button to confirm.
If the oven is switched on:
1. Press the "MENU" button.
2. Select the MINUTE MINDER command and press "OK"
to begin modifying the value.
3. The 4 numerical digits will begin to flash.
4. Adjust the values using the
button.
5. Press the "OK" button to confirm.
6. Once this has been set, the oven may be switched off.
The display will show the time on the minute minder: when
the set time has elapsed, the oven will emit a sound alert.
This will automatically stop after one minute or when any
symbol on the control panel is pressed.
! The minute minder does not switch the oven on or off.
Child lock
The Child lock function may be used to lock the oven
control panel.
To activate the function, press the
SWITCH ON option, then press the "OK" button to confirm
the setting.
To deactivate the function, repeat the procedure, this time
selecting the DO NOT SWITCH ON option.
The child lock may be activated while the oven is in use, or
while it is switched off. The child lock function can also be
deactivated in all the above situations and after the oven
has completed the cooking programme.
ExtraLarge Space
! Do not use position "D" for racks.
Starting the oven
! Every time the oven is switched on it is set to the
UNIVERSAL menu.
! To return to the main programme selector menu screen,
press the "P" button.
button,
and
buttons.
and
buttons.
and
buttons.
button, select the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Bc 199d p xa sBcg 199d p sSch77 199dt p

Table des Matières