Connections, Operating And Display Elements - Cameo ZENIT Z120 G2 Manuel D'utilisation

CONNECTIONS, OPERATING AND DISPLAY ELEMENTS

1
POWER IN
1
IP65 Power Twist mains input socket with rubber sealing cap. Operating voltage 100–240 V AC/50–60 Hz. Connection via supplied power
cable (when not in use, always close with rubber sealing cap).
POWER OUT
2
IP65 Power Twist mains output socket with rubber sealing cap. Facilitates power supply to other CAMEO lights. Ensure that the total current
consumption of all connected devices does not exceed the value specified on the device in amperes (A) (when not in use, always close with
the rubber sealing cap).
DMX IN
3
Male IP65 5-pin XLR socket for connecting a DMX control device (e.g. DMX console. When not in use, always close with the rubber sealing cap).
DMX OUT
4
Female IP65 5-pin XLR socket for sending DMX control signal (when not in use, always close with the rubber sealing cap).
OLED DISPLAY
5
Displays the current operating mode and other system settings.
5
6
2 3
8
4
7
5