Cameo ZENIT Z120 G2 Manuel D'utilisation page 8

STAND-ALONE STATIC MODE (Static)
The static mode allows the Dimmer, Strobe, R, G, B and W etc. to be adjusted directly on the device with values between 000 and 255, in a
similar way to with a DMX controller. In this way, an individual scene can be created without an additional DMX controller. Select the static
mode as per the procedure previously described in SETTING STAND ALONE MODE and confirm with ENTER. Using the UP and DOWN
controls, now select the menu item that you wish to edit (observe arrow) and confirm with ENTER. The display will show a three-digit
number field and you can use the UP and DOWN controls to configure the desired value between 000 and 255. Confirm with ENTER.
-------- Stand Alone -------
Auto
 Static
Colour Macro
Tunable White
User Colour
STAND-ALONE COLOUR MACRO MODE (Colour Macro)
15 different preset colour macros are available. Select the "Colour Macro" mode as per the procedure previously described in SETTING
STAND ALONE MODE and confirm with ENTER. Using the UP and DOWN controls, now select the desired colour preset (observe arrow) and
confirm with ENTER (Colour Off = blackout). The display will show a three-digit number field and you can use the UP and DOWN controls to
set the desired brightness between 000 and 100. Confirm with ENTER. Configuration of the zoom function is carried out in the same way.
------- Stand Alone ------
Auto
Static
 Colour Macro
Tunable White
User Colour
STAND-ALONE COLOUR TEMPERATURE MODE (Tunable White)
The colour temperature mode enables you to configure the colour temperature from cold white to warm white (CTC), adjust the brightness
(Dimmer), and the zoom function directly on the device. Select the colour temperature mode as per the procedure previously described in
SETTING STAND ALONE MODE and confirm with ENTER. Using the UP and DOWN controls, now select the menu item that you wish to edit
(observe arrow) and confirm with ENTER. The display will show a three-digit number field and you can use the UP and DOWN controls to
configure the desired value. Confirm with ENTER.
------- Stand Alone ------
Auto
Static
Colour Macro
 Tunable White
User Colour
8
----------- Static -----------
 Dimmer <255>
DimFine <255>
Strobe <255>
Red <255>
Green <255>
Blue <255>
White <255>
Colour Temp <255>
Zoom <255>
Zoom Fine <255>
----- Colour Macro -----
 Colour Off
Red <100>
Amber <100>
Yellow Warm <100>
Yellow <100>
Green <100>
Turquoise <100>
Cyan <100>
----- Tunable White -----
 Dimmer <100>
CTC <100>
Zoom <100>
000
–
Mode
255
Static
Blue <100>
Lavender <100>
Mauve <100>
Magenta <100>
Pink <100>
Warm White <100>
White <100>
Cold White <100>
Zoom <100>
000
–
Mode
100
Tunable White
000
–
Mode
100
Colour Macro