Basic Operation (1) - Teac SR-2 Mode D'emploi

3 1 2
1 Press the STANDBY/ON button to turn the unit on.
< The unit turns on with the source that was last selected.
If the iPod/iPhone that is in playback mode is inserted
into the Dock, the SR-2 will automatically turn on and
start playback of the iPod/iPhone.
2 Press the FUNCTION button to select a source.
< To listen to an external source connected to the AUX IN
jack, select AUX.
< If you select "iPod" when no iPod/iPhone is docked, the
iPod indicator on the display blinks.
3 Play the source, and adjust the volume using the
VOLUME knob.
The volume is adjustable from 0 to 40.

Basic Operation (1)

Dimmer
You can change the front panel's display brightness. Use
the DIMMER button to change the brightness among 3
levels and off.
This function works even if the unit is in standby.
< This function will be cancelled when the STANDBY/ON
button is pressed.
Muting
To mute the sound temporarily, press the MUTING
button. Press the MUTING button again to restore the
sound.
< "MUTING" blinks on the display while the muting is
engaged.
< If you change the volume or source during the muting,
the muting will be cancelled.
13