Teac SR-2 Mode D'emploi page 23

3 Turn the TUNING knob to set the minute, and
then press the ALARM 1 button.
Now the on time is set.
4 Repeat steps 2 and 3
Now the off time is set.
5 Turn the TUNING knob to select a source (TUNER,
iPod or buzzer), and then press the ALARM 1
button.
1 2 3
1
iPod/iPhone playback function indicator
2
Tuner function indicator
3
Buzzer function indicator
The "volume" value blinks.
6 Turn the TUNING knob to set the volume, and
then press the ALARM 1 button.
The volume for timer operation is adjustable from 10 to
MAX (40).
Setting the timer is now completed.
< You can also use the skip buttons (.//) instead of
the TUNING knob.
to set the timer-off time.
STANDBY/ON
To turn on the timer
1 After setting the timer, press the ALARM 1 or
ALARM 2 button to turn the timer on.
The Timer indicator ( or
2 Prepare the source.
When the source is set to "iPod", insert an iPod/iPhone.
When the source is set to "TUNER", tune in a station.
3 Press the STANDBY/ON button to turn the unit
standby.
Do not forget to turn the unit standby, or the
timer will not work.
If the timer reaches the timer-on time while the unit
is on, the unit will turn off when the timer reaches the
timer-off time.
< Playback volume will gradually increase up to your set
volume when the unit is turned on by the timer.
< If the source is set to "iPod" but no iPod/iPhone is set,
the unit will turn on into buzzer mode.
< When the source is set to "TUNER" and the unit turns
on, it will tune in the station you selected last time.
ALARM 1, ALARM 2
) appears on the display.
23